Review Hantek2D42 Function

WisdomAugust

Freezing the Screen

You can freeze the screen (all readings and waveforms) at any time.

1. Freeze the screen. The key illumination is on in red.

STOP appears at the top left of the screen.

In scope mode, stop or run the waveform acquisition

WisdomAugust

Hold appears at the left bottom of the screen.

In DMM mode, hold the measuring data or update data

WisdomAugust

OUTPUT icon appears in grey at the top right of the screen.

In generator mode, turn off the waveform output.

WisdomAugust

OUTPUT icon appears in green at the top right of the screen.

In generator mode, turn on the waveform output.

Resume your measurement. The key illumination is light green.

WisdomAugust

Resetting the Test Device

If you want to reset the test device to the factory settings, do the following:

1. Turn on the test device.

2.   Display oscilloscope Utility menu.

3.   Turn to page 4/4.

WisdomAugust

4. Press Default key to display the default label.

WisdomAugust

5. Press F1 soft key to recall the factory settings.

WisdomAugust

Changing the information Language

During operation of the test device, messages may appear at the bottom of the screen. You can select the language in which these messages are displayed.

1. Display oscilloscope Utility menu.

2. Press F1 to switch the langage between English and China.