Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 355040|Reply: 276

Update the firmware of Hantek2D72/2D42/2C72/2C42

  [Copy link]

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2018-11-7 11:28:53 | Show all posts |Read mode
Edited by amy at 2019-11-25 09:53

Update the firmware of Hantek2D72/2D42/2C72/2C42

Update with DFU software.
1. Download the programming tool in the following link and install.       http://hantek.com/en/ProductDetail_1_13174.html
2. Press F1 and Power on button of the oscilloscope at the same time to enter programming mode.
   

3. Connect the oscilloscope to the computer and open the device manager of the computer.
4. Find a new device and right click it to update the driver. The driver files are in this path: STMicroelectronics\Software\DfuSe v3.0.5\Bin\Driver.
   
5. Open DfuSe Demo software, click "Choose" to select the firmware (***.dfu), and click "Upgrade" to update the firmware. After updated, click "Leave DFU mode" to exit the programming mode.
   


Also, users can use the software to update the firmware.
1. Download the software in the following link and install.       http://hantek.com/en/ProductDetail_1_13174.html
2. Connect the scope to your computer via the USB cable.
3. Run the software Hantek2xx2.
    Confirm the scope is connected to the computer successfully.
    If not, please open the device manager to install the driver maunally.
4. Click "Help->CheckUpdate" to open HT2xxAutoUpdate software, now update according to Wizard.
   
   


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

Related collections:

Reply

Use magic Report

1

Threads

36

Posts

36

Credits

新手上路

Rank: 1

Credits
36
Post time 2019-12-13 07:08:41 | Show all posts
Edited by AxGxP at 2019-12-13 08:22

Баг с выключением при переходе с 50ms на 20ms исправлен!
Баг с автоматическим переключением из режима Roll в режим Y-T испрпавлен!




Порошивка одинаковая на всех этих осциллографах. 2C42/2D42/2C72/2D72








This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

Comments

При записи прошивки HantekHTXAxGxP002.zip изменения диапазонов так и остались наоборот  Post time 2020-5-10 14:59
Very nice mod, now scope became really handy on buttons. Thanks!  Post time 2020-3-15 01:24
Спасибо. Всё работает как описано.  Post time 2020-2-12 07:14
does this work with 2d82auto?  Post time 2020-1-26 02:02
does this work with 2d82auto?  Post time 2020-1-26 02:01

1

Threads

36

Posts

36

Credits

新手上路

Rank: 1

Credits
36
Post time 2019-12-12 08:31:32 | Show all posts
Edited by AxGxP at 2019-12-12 12:49

Ну что... Разработчики игнорят, пришлось самому всё делать.
Ловите и наслаждайтесь!



Мною проведены исправления!
Прошивка создана на основе HantekHTX2019110801.

Что изменено:
Уменьшено время отображения меню с 17 секунд до 8 секунд.

Исправленны назначения кнопок, в режиме настройки усилителя и развёртки.
Теперь стрелка вправо увеличивает амплитуду отображаемого сигнала, а стрелка влево уменьшает.
Стрелка вниз замедляет развёртку, стрелка вверх ускоряет.
Теперь управление как на любом нормальном осциллографе!

И наверное самое главное:
Теперь можно переключаться между настройками не вызывая отображения меню!
Нажатие кнопок F1,F2,F3,F4 не вызывает появление меню.
F1 активирует настройку усилителя Ch1.
F2 активирует настройку усилителя Ch2.
F3 активирует настройку Trig.
F4 развёртки Time.

Все остальные функции работают как в оригинальной прошивке. Но появился сложно преодолимый баг:
Режима ROLL теперь не переключается автоматически в режим Y-T, при ускорении развертки выше 100мс/дел.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

Comments

При переключении во время измерения с 50mS на 20mS прибор выключается.  Post time 2019-12-13 00:04
For which device? (c42, d42, c72, d72) English/Chinese?  Post time 2019-12-12 18:43

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2019-10-26 04:30:41 From the mobile phone | Show all posts
There are no updates for 2 months. If you do not want to update, then give people the source code.

1

Threads

36

Posts

36

Credits

新手上路

Rank: 1

Credits
36
Post time 2019-12-14 07:00:01 | Show all posts
alik3t replied at 2019-12-13 18:31
AxGxP здравствуйте.
Извините что пишу ещё раз. В коммента ...

Теоретически всё возможно... Но практически - очень сложно осуществимо...

У меня нет исходников программы, есть только возможность редактировать заводскую прошивку, ограничиваясь её адресацией... Там много всякого лишнего, что-то можно выкинуть, немного переделать, изменить, но только в рамках существующего кода и в рамках его размера.
Я не могу просто взять и добавить какой-то функционал, которого там нет вообще, не убрав чего-то другого.

Вполне вероятно, что проще написать полностью свою прошивку, чем исправить все недостатки и доделать эту.

Если будет время я ещё покопаю... Есть желание добавить возможность изменять частоту генератора, не выходя из режима осциллографа.

Для кардинальных изменений и улучшений нужно иметь исходники...

Comments

Спасибо Вам большое!  Post time 2019-12-20 18:17
Спасибо за ответ. Даже то что вы сделали очень помогает в работе с прибором. Дальнейших успехов!  Post time 2019-12-14 23:54
Спасибо дружище! Надеемся Ваш успех,и живем надеждой.  Post time 2019-12-14 21:23

0

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2020-7-14 06:41:37 | Show all posts
Edited by borsuk at 2020-7-22 06:00
amy replied at 2020-7-10 08:37
Sorry, I can't understand what is meant by battery operation. Please discribe again.


So, Dear, someone will help me with this problem, it does not matter, but it is better to have an indication that the device is turned on. Thank you for any help.

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2019-12-15 02:55:23 From the mobile phone | Show all posts
AxGxP хочу сказать вам огромное спасибо, за проделанную работу. Вы воплотили большинство исправлений, которые просили люди у разработчика на протяжении целого года. Единственное, что осталось изменить без серьезного редактирования кода, это изменить цвет фона  menu measurement, с серого на черный. Ну или хотя бы на темно серый. Ибо реально порой трудно рассмотреть показания, даже имея хорошее зрение.

10

Threads

171

Posts

171

Credits

注册会员

Rank: 2

Credits
171
Post time 2019-12-12 12:23:35 | Show all posts
Edited by OASJ2YSeeEhBQo1 at 2019-12-12 23:29
AxGxP replied at 2019-12-12 08:31
Ну что... Разработчики игнорят, пришлось самому всё дел ...

Nice job! I will be testing the mods and I'll report back.

It's a shame that hantek doesn't care to improve the software of its devices. If they open sourced the code we would have by now a useful device and they would be selling 10x more of it.

1

Threads

36

Posts

36

Credits

新手上路

Rank: 1

Credits
36
Post time 2019-12-4 22:59:11 | Show all posts
what about make menu hide on pressing "Enter" or "Menu" second time?
Change button Left<->Right in Channel Mode (voltage/division)?
Change button Up<->Down in Time Mode (seconds/division)?

Is it so hard to make this changes?
Please! Do it!

1

Threads

12

Posts

12

Credits

新手上路

Rank: 1

Credits
12
Post time 2021-7-29 18:44:58 | Show all posts
Joy-It has now provided a firmware that can be updated directly via DfuSe Demo. I have tested it with my Hantek 2D72 and the flashing process did work flawlessly.

0

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2021-1-28 15:53:59 | Show all posts
If the manufacturer does not want to upgrade the device and fix bugs in the software, can you get the firmware in its original form? I think then the craftsmen would write a normal firmware. Which would fix and add a lot. I think there is no secret in the firmware so that the manufacturer does not give the source code.

Can we get software to change it and upgrade?

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2018-11-7 14:06:37 | Show all posts
Edited by amy at 2019-11-25 09:44

Firmware version: 2018110201


Firmware version: 2018111501


Firmware version: 2018120601


Firmware version: 2019010401


Firmware version: 2019022001



Firmware version: 20190030201



Firmware version: 2019041501



Firmware version: 2019060601


Firmware version: 2019082401 Void

Firmware version: 2019082801


Firmware version: 2019110801














This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2018-11-14 01:05:14 | Show all posts
Hi Amy, I have a question about the firmware. Instead of showing amplitude, can it instead show minimum and maximum? Right now the firmware shows "amplitude = maxiumum - minimum" which is less usefull than just maximum and minimum. Please ask the firmware/software team to look at this.

0

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2018-12-1 02:29:12 | Show all posts

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2018-12-3 08:49:25 | Show all posts
dmitrius replied at 2018-12-1 02:29
Hi. From the official page http://hantek.com/ProductDetail_5_9242.html. Not working download links:
...

Sir, we have updated the link, please download again.

0

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
Post time 2018-12-5 05:13:52 | Show all posts
Where can I find the change log for these upgrades?

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2018-12-7 14:06:39 | Show all posts
Sorry, we don't provide the change log.

0

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
Post time 2018-12-7 22:58:25 | Show all posts
OK, but the new firmware does provide new functionality? in order to upgrade it, is it necessary upgrade the fpga code first?
Thanks

0

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
Post time 2018-12-16 22:41:29 | Show all posts
Ich würde gerne mein Hantek 2c42 auf den neusten Stand bringen.
Was muss ich machen.
was ist der Fpga-Code und muss er auch aktualisiert werden ??

(I would like to update my Hantek 2c42.
What should I do.
what is the Fpga code and does it have to be updated ??)

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2018-12-19 08:57:59 | Show all posts
dpcdietmar replied at 2018-12-16 22:41
Ich würde gerne mein Hantek 2c42 auf den neusten Stand bringen.
Was muss ich machen.
was ist der Fp ...

Sir, please press Menu->sys info to check the FPGA version.

You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 03:44 GMT+8 , Processed in 0.201164 second(s), 26 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list