Update the firmware of Hantek2D72/2D42/2C72/2C42

amy

Update the firmware of Hantek2D72/2D42/2C72/2C42

Update with DFU software.
1. Download the programming tool in the following link and install.       http://hantek.com/en/ProductDetail_1_13174.html
2. Press F1 and Power on button of the oscilloscope at the same time to enter programming mode.
   

3. Connect the oscilloscope to the computer and open the device manager of the computer.
4. Find a new device and right click it to update the driver. The driver files are in this path: STMicroelectronics\Software\DfuSe v3.0.5\Bin\Driver.
   
5. Open DfuSe Demo software, click "Choose" to select the firmware (***.dfu), and click "Upgrade" to update the firmware. After updated, click "Leave DFU mode" to exit the programming mode.
   


Also, users can use the software to update the firmware.
1. Download the software in the following link and install.       http://hantek.com/en/ProductDetail_1_13174.html
2. Connect the scope to your computer via the USB cable.
3. Run the software Hantek2xx2.
    Confirm the scope is connected to the computer successfully.
    If not, please open the device manager to install the driver maunally.
4. Click "Help->CheckUpdate" to open HT2xxAutoUpdate software, now update according to Wizard.
   
   

amy

Firmware version: 2018110201


Firmware version: 2018111501


Firmware version: 2018120601


Firmware version: 2019010401


Firmware version: 2019022001



Firmware version: 20190030201



Firmware version: 2019041501



Firmware version: 2019060601


Firmware version: 2019082401 Void

Firmware version: 2019082801


Firmware version: 2019110801

amy

dmitrius replied at 2018-12-1 02:29
Hi. From the official page http://hantek.com/ProductDetail_5_9242.html. Not working download links:
...

Sir, we have updated the link, please download again.

amy

Sorry, we don't provide the change log.

amy

dpcdietmar replied at 2018-12-16 22:41
Ich würde gerne mein Hantek 2c42 auf den neusten Stand bringen.
Was muss ich machen.
was ist der Fp ...

Sir, please press Menu->sys info to check the FPGA version.

amy

dpcdietmar replied at 2018-12-19 21:21
Hallo FPGA Version 0x0

Sir, you can download the latest FPGA software to update in this link: https://www.eediscuss.com/forum. ... id=14649&extra=

amy

dpcdietmar replied at 2018-12-22 00:41
Hallo, danke für die Antwort.
Ich habe alles so gemach wie in der Beschreibung.
auch nach aus und e ...

Sir, please refer to this post to update the firmware: https://www.eediscuss.com/forum. ... id=13676&extra=

amy

Alan_C replied at 2019-2-26 02:21
Hi
I have a new problem after upgrading the firmware I lost the AWG function meter is being detecte ...

Sir, before update the firmware, have you used the AWG interface to output the signal?
Can you confirm that the model in the system information is 2D72 before you update the firmware?

amy

Alan_C replied at 2019-2-26 16:18
How can I fix this Problem Please Help ??

Sir, please give me the serial number of your scope, it is on the battery cover.

amy

Alan_C replied at 2019-3-5 06:09
Hi Amy

here is the Serial No: CN1848008001214

Sir, I think your oscilloscope doesn't have a signal source.
It was our fault.  Label model and internal model are inconsistent.
Please contact your seller to replace.