Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

Author: amy

Update the firmware of Hantek2D72/2D42/2C72/2C42

  [Copy link]

0

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
Post time 2019-3-21 00:11:16 | Show all posts
Edited by Sebastien at 2019-3-21 00:21

The firmware update procedure is not working for me.

Pushing F1 + Power. Waiting for the play/pause button to flash.
Asfter that I plug the USB cable.
The power button is red. Play/Stop button is doing a color sequence and after that the scope is starting automatically...
One of my friend have the same scope and when we do the exact same thing it's working on his model.
Not on mine.

Any Idea?

My model  is 2D72
Serial : CN19010072001385


167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2019-3-22 13:42:56 | Show all posts
Sebastien replied at 2019-3-21 00:11
The firmware update procedure is not working for me.

Pushing F1 + Power. Waiting for the play/pause ...

Please take a picture to study

0

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
Post time 2019-3-24 04:03:11 | Show all posts

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2019-3-27 16:12:20 | Show all posts
Sorry, I can't open the link. Please upload by this link: https://www.filemail.com/

0

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
Post time 2019-3-28 01:53:27 | Show all posts
amy replied at 2019-3-27 16:12
Sorry, I can't open the link. Please upload by this link: https://www.filemail.com/

Here is the link :

https://fil.email/EabNNgxm

Thanks

0

Threads

8

Posts

8

Credits

新手上路

Rank: 1

Credits
8
Post time 2019-3-28 02:40:13 | Show all posts
Edited by Alan_C at 2019-3-28 05:27

why is that a 30-year-old fluke multimeter is 5x  faster than this hantek on DMM mode reading Resistance is very slow &  IT TAKES FOREVER TO READ A CAPACITOR VALUE !!!

Can this be fixed with a firmware update ???

Please work on the DMM it is very slow !!



0

Threads

8

Posts

8

Credits

新手上路

Rank: 1

Credits
8
Post time 2019-3-28 05:32:51 | Show all posts
amy replied at 2019-3-6 15:08
Sir, I think your oscilloscope doesn't have a signal source.
It was our fault.  Label model and in ...

Hi the seller on Aliexpress won't replace it because
the protection time has expired.

is it possible that you replace it for me ??

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2019-3-28 11:28:23 | Show all posts
Edited by amy at 2019-3-28 11:57
Method 1:
First turn off the scope and connect the scope to your computer.
Press F1 and power button at the same time until the indicator in the lower right corner flickers.
Can oscilloscopes stay in DFU mode?

Method 2:
Remove the two batteries.
Press F1 and connect the scope to your computer at the same time.
Can oscilloscopes stay in DFU mode?

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2019-3-28 11:59:05 | Show all posts
Alan_C replied at 2019-3-28 02:40
why is that a 30-year-old fluke multimeter is 5x  faster than this hantek on DMM mode reading Resist ...

Sorry, the measurement rate is determined by hardware. Can't be improved by firmware.

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
Post time 2019-3-29 17:11:51 | Show all posts
Hello,
I've received a new 2D42 yesterday and it was working fine. I've tried to upgrade firmware by following the instructions found on this forum (using firmware and update tool from this page http://hantek.com/en/ProductDetail_1_13174.html, updating using Windows 10) and the update failed right after the flash was erased (see screenshot).

Now the device is dead and cannot start anymore (not even in DFUse mode ...)
Any way to recover and unbrick it ?
Thanks in advance for your help.








This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 07:40 GMT+8 , Processed in 0.248625 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list