Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

Author: amy

Update the firmware of Hantek2D72/2D42/2C72/2C42

  [Copy link]

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2019-2-18 16:10:48 | Show all posts
Good afternoon. Why 2D42 capacitors measures only up to 10 mk.f

0

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
Post time 2019-2-23 23:21:04 | Show all posts
Hello. Thank you very much that in the new firmware for February they implemented the function of at least m maximum. The device works better with this firmware.

0

Threads

8

Posts

8

Credits

新手上路

Rank: 1

Credits
8
Post time 2019-2-26 01:57:01 | Show all posts
Hi
I have just updated to the latest firmware, I have 2 issues that are bothering me

1, Why is the Autoranging on DMM, OHM  of this multimeter is so SLOW  ??
2, would greate if the backlight timeout would reset itself when the meter is being used on DMM ( when input is detected  )

Is it possible to resolve these issues?

Thanks

0

Threads

8

Posts

8

Credits

新手上路

Rank: 1

Credits
8
Post time 2019-2-26 02:21:44 | Show all posts
Hi
I have a new problem after upgrading the firmware I lost the AWG function meter is being detected as 2C42  !!  when it should be 2D42

How can I resolve this Please help

0

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2019-2-26 11:17:33 | Show all posts
Последняя прошивка HantekHTX2019010401 с ошибкой. AWG не работает или работает через раз. Сам осциллограф  не видит сигнал от генератора.

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
 Author| Post time 2019-2-26 15:26:23 | Show all posts
Alan_C replied at 2019-2-26 02:21
Hi
I have a new problem after upgrading the firmware I lost the AWG function meter is being detecte ...

Sir, before update the firmware, have you used the AWG interface to output the signal?
Can you confirm that the model in the system information is 2D72 before you update the firmware?

0

Threads

8

Posts

8

Credits

新手上路

Rank: 1

Credits
8
Post time 2019-2-26 16:15:31 | Show all posts
Edited by Alan_C at 2019-2-26 16:31

Hi ,

Yes I have used the AWG before you can see in the picture the model number
and the firmware model number does not match !!Meter Serial No: CN1848008001214







This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

8

Posts

8

Credits

新手上路

Rank: 1

Credits
8
Post time 2019-2-26 16:18:29 | Show all posts
How can I fix this Problem Please Help ??

0

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
Post time 2019-2-27 01:07:24 | Show all posts
dreamich replied at 2019-2-26 11:17
Последняя прошивка HantekHTX2019010401 с ошибкой. AWG не работает ...

I have on model 2D42 all works. To see the oscilloscope signal from the generator, you need to run it by pressing the button it will change from red to green, then if you close the probes and select the Scope function, you can see the signal. The mass during the test can not be connected

0

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
Post time 2019-2-27 01:14:10 | Show all posts
Alan_C replied at 2019-2-26 16:18
How can I fix this Problem Please Help ??

Try to reset the settings and install the firmware Hantek2000_Firmware2018120601 without connecting anything except the cable to the computer
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 08:40 GMT+8 , Processed in 0.243676 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list