Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 24531|Reply: 126

Update the firmware of Hantek2D72/2D42/2C72/2C42

[Copy link]

28

Threads

1486

Posts

1647

Credits

实习版主

Rank: 7Rank: 7Rank: 7

Credits
1647
Post time 2018-11-7 11:28:53 | Show all posts |Read mode
Edited by amy at 2018-12-4 14:51

Update the firmware of Hantek2D72/2D42/2C72/2C42

1. Download the programming tool in the following link and install.       http://hantek.com/en/ProductDetail_1_13174.html
2. Press F1 and Power on button of the oscilloscope at the same time to enter programming mode.
   

3. Connect the oscilloscope to the computer and open the device manager of the computer.
4. Find a new device and right click it to update the driver. The driver files are in this path: STMicroelectronics\Software\DfuSe v3.0.5\Bin\Driver.
   
5. Open DfuSe Demo software, click "Choose" to select the firmware (***.dfu), and click "Upgrade" to update the firmware. After updated, click "Leave DFU mode" to exit the programming mode.
   







This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
Reply

Use magic Report

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2019-10-26 04:30:41 From the mobile phone | Show all posts
There are no updates for 2 months. If you do not want to update, then give people the source code.

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2019-11-2 00:30:23 | Show all posts
New software and firmware! What are the changes?


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

21

Posts

21

Credits

新手上路

Rank: 1

Credits
21
Post time 2019-11-7 02:38:04 | Show all posts
Seems that: 2019082801
Settings saving function properly.

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2019-11-4 14:27:06 | Show all posts
AxGxP replied at 2019-11-3 16:10
Where did you downloaded it? Can you post it here?

2019103001

The measure bug has been fixed.

7

Threads

99

Posts

99

Credits

注册会员

Rank: 2

Credits
99
Post time 2019-9-11 12:25:22 | Show all posts
amy replied at 2019-8-24 16:49
Hi, the bugs have been modified in the latest firmware 2019082401.
Please check.

Hi Amy,

I am testing the FW version 2019082801, I notice that the bugs with the battery icon and AWG are fixed but got a new one: just activate the measurements and set the time base to anything faster than 100ns. You'll see a strip blinking on the screen over the measurements:


I also notice problems with syncronization of the data while controlling the scope with the pc software (I'm using v1.1.11) but I still need to test to see if the problem is in the FW or the software.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2019-2-16 05:31:43 | Show all posts
Здарова!

достать аккумы и вставить обратно через пару-тройку секунд. Нажать F1+питалово (он может не подавать признаков жизни как бы) и подключить к компу. Должен определиться.

Если же все плохо - надо будет программатор ST-LINK v2

0

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2019-2-8 02:19:56 | Show all posts
Hello, I just received my 2D72 scope and have been updating/setting up software/firmware/LPGA and after following all instructions in this thread and the program saying that the upgrade was successful, in menu>sys info it shows "SOFT : 2018120601". But I flashed the one posted in this thread, titled "HantekHTX2019010401.dfu". Does even the 201901 version still show "201812" in menu? My FPGA shows V02, indicating that I was successful in upgrading it. I just want to make sure that I upgraded the firmware correctly. Thank you in advance

28

Threads

1486

Posts

1647

Credits

实习版主

Rank: 7Rank: 7Rank: 7

Credits
1647
 Author| Post time 2018-11-7 14:06:37 | Show all posts
Edited by amy at 2019-8-28 16:20

Firmware version: 2018110201


Firmware version: 2018111501


Firmware version: 2018120601


Firmware version: 2019010401


Firmware version: 2019022001



Firmware version: 20190030201



Firmware version: 2019041501



Firmware version: 2019060601


Firmware version: 2019082401 Void

Firmware version: 2019082801








This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2018-11-14 01:05:14 | Show all posts
Hi Amy, I have a question about the firmware. Instead of showing amplitude, can it instead show minimum and maximum? Right now the firmware shows "amplitude = maxiumum - minimum" which is less usefull than just maximum and minimum. Please ask the firmware/software team to look at this.

0

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2018-12-1 02:29:12 | Show all posts

28

Threads

1486

Posts

1647

Credits

实习版主

Rank: 7Rank: 7Rank: 7

Credits
1647
 Author| Post time 2018-12-3 08:49:25 | Show all posts
dmitrius replied at 2018-12-1 02:29
Hi. From the official page http://hantek.com/ProductDetail_5_9242.html. Not working download links:
...

Sir, we have updated the link, please download again.

0

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
Post time 2018-12-5 05:13:52 | Show all posts
Where can I find the change log for these upgrades?

28

Threads

1486

Posts

1647

Credits

实习版主

Rank: 7Rank: 7Rank: 7

Credits
1647
 Author| Post time 2018-12-7 14:06:39 | Show all posts
Sorry, we don't provide the change log.

0

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
Post time 2018-12-7 22:58:25 | Show all posts
OK, but the new firmware does provide new functionality? in order to upgrade it, is it necessary upgrade the fpga code first?
Thanks

0

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
Post time 2018-12-16 22:41:29 | Show all posts
Ich würde gerne mein Hantek 2c42 auf den neusten Stand bringen.
Was muss ich machen.
was ist der Fpga-Code und muss er auch aktualisiert werden ??

(I would like to update my Hantek 2c42.
What should I do.
what is the Fpga code and does it have to be updated ??)

28

Threads

1486

Posts

1647

Credits

实习版主

Rank: 7Rank: 7Rank: 7

Credits
1647
 Author| Post time 2018-12-19 08:57:59 | Show all posts
dpcdietmar replied at 2018-12-16 22:41
Ich würde gerne mein Hantek 2c42 auf den neusten Stand bringen.
Was muss ich machen.
was ist der Fp ...

Sir, please press Menu->sys info to check the FPGA version.

You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2019-11-21 13:20 GMT+8 , Processed in 0.474345 second(s), 23 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list