Hantek2000 series multi-function mini handheld oscilloscope

罐头瓶子 · Post time 2019-1-25 23:50:03

我买的2c42刚到，首先说下你们快递时怎么没放缓冲的泡沫之类的，其次，我想证实一下，这款表，原厂有没有贴屏幕贴膜之类的，
最重要的一个bug反馈一下：二极管档测led时，不显示导通电压。并且一般的led很难点亮。
其次，我刚测了下晶振，正弦波，是歪的，而且是跳动的，一直在跳动。频率显示也是在不停的跳动。我想证实一下产品本身就这样，还是运输过程中撞坏了，还是人家的退货。
谢谢

罐头瓶子 · Post time 2019-1-25 23:56:06

还一个问题，包装万用表的内胆袋子，怎么跟老鼠啃过一样，毕竟大厂，业内专家，我实在太担心了，是不是运输过程中撞坏了？能不能换新

WisdomAugust · Post time 2019-2-12 08:56:15

Edited by WisdomAugust at 2019-2-12 09:01

Suggest to update the firmware on your device.

WisdomAugust · Post time 2019-2-12 08:57:17

+79003631279 replied at 2019-1-21 16:14
I would like to see this feature on the device itself. The program on the PC has more functions bu ...

This is the primary level handheld oscilloscope.For the one with all measurement functions display on device, suggest buy the handheld like DSO1000B series.
http://www.hantek.com/en/ProductDetail_1_13.html

+79003631279 · Post time 2019-2-14 22:41:53

This is an oscilloscope and not a toy entry level. All functions on it are not needed, and the function minimum - the maximum is not difficult to make programmatically. Thanks for the answer

+79003631279 · Post time 2019-2-23 23:23:31

Edited by +79003631279 at 2019-2-23 23:59

Thanks for the new firmware, which made the min / max function. FPGA не нужно обновлять?