MPO6002EDU Series Oscilloscope Guide

WisdomAugust

Utility Key -> Acquire -> Segmented -> History Wave -> Interval Softkey help information

Press this softkey and use the V0 knob to set the time intervals among each acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> Return Softkey help information

Press this softkey to return to the previous menu.

Utility Key -> Acquire -> Segmented -> Return Softkey help information

Press this softkey to return to the previous menu.

Utility Key -> Acquire -> Segmented Softkey help information

Turn on or off the Sequence Mode.

Utility Key -> Acquire -> TimeRef Center Softkey help information

Set the waveform horizontally expand from the trigger point or from the screen center.

Utility Key -> Acquire -> Return Softkey help information

Press this softkey to return to the previous menu.

WisdomAugust

Utility Key -> Acquire -> Segmented -> History Wave -> Frame No. Softkey help information

Press this softkey to adjust the frame number of waveforms.

Utility Key -> Acquire -> Segmented -> History Wave -> Forward Icon Softkey help information

Press this softkey to step to a newer acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> Play Icon Softkey help information

To scroll the history of acquisition forward.

Utility Key -> Acquire -> Segmented -> History Wave -> Stop Icon Softkey help information

Pause to scroll the history of acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> Back Icon Softkey help information

Press this softkey to jump to an older acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> List On/Off Softkey help information

Press this softkey to display a list of previously captured waveforms at the top left of the screen.

WisdomAugust

Utility Key -> Acquire -> Fast Acquire Softkey help information

Turn on or off Fast Acquire function.

The purpose of Fast Acquire is to enable high-speed waveform capture, which is helpful in finding elusive signal anomalies.

Utility Key -> Acquire -> Segmented -> Segmented On/Off Softkey help information

Press this softkey to open the Sequence Mode menu.

Using Sequence Mode, thousands of trigger events can be stored as segments into the scope's acquisition memory.

Utility Key -> Acquire -> Segmented -> Segments Set Softkey help information

Press this softkey and turn the V0 knob to adjust the number of segments.

Utility Key -> Acquire -> Segmented -> History Wave Softkey help information

Access History Mode.

The history mode allows you to look back to previous acquisitions stored in the scope's buffer.

WisdomAugust

Utility Key -> Acquire -> Time Mode Softkey help information

Press this key to toggle the time mode among YT mode, XY mode, and roll mode.

Note: XY mode is unusable in average mode.

Utility Key -> Acquire -> Interpolation Softkey help information

Switch the interpolation mode among sin interpolation, linear interpolation, and ladder interpolation.

Utility Key -> Acquire -> Average Count Softkey help information

In average acquisition mode, press this softkey and turn the multipurpose V0 knob to regulate the number

of waveforms that are to be averaged, ranging from 2 to 1024.

As more waveforms are averaged, the vertical resolution improves and noise reduces.

Utility Key -> Acquire -> Mem Depth Softkey help information

Press this softkey to switch the memory depth.

WisdomAugust

Utility Key -> Language Softkey help information

Select the display language of the scope.

Utility Key -> Touch Softkey help information

Enable or disable the touch screen.

Utility Key -> Acquire Softkey help information

Open the Acquire Menu.

Utility Key -> Acquire -> Acq Mode Softkey help information

Set the acquire mode as normal, average, peak detect, or high resolution.

Normal mode - it gives a good general representation of the signal, best to use for day-to-day debugging tasks.

Average mode - it takes multiple waveforms captures and averages them together, averages out the random

noise on the signal.

Peak-detect mode - best used for detecting glitches or viewing very narrow pulses.

High-resolution mode - useful for maximizing the bits of resolution on the scope.

WisdomAugust

Utility Key helpinformation

When you open the Utility Menu, youcan:

*Do search.

*Update firmware.

*Switch language.

*Perform Pass/Fail.

*Edit time and date.

*Set up the network.

*Turn on or off the sound.

*Review history waveforms.

*Review system information.

*Enable or disable the touch screen.

*Configure logic analyzerthresholds.

*Set up scope acquisitionparameters.

*Configure frequency responseanalysis (FRA).

*Perform calibration, self-test and frontpanel test.

WisdomAugust

Default Key -> Pre Setup Softkey help information

Select the type of default setup.

There're three types: default setup,factory setup, and user setup.

Default Key -> Pre Setup ->User ->Save Softkey help information

Save current settings as the usersetup.

Default Key -> Secure Erase Softkey help information

Clear all saved reference waveforms,saved setups and all other settings the scope was holding.

And the scope willreboot when completed.

WisdomAugust

Accessthe Built-In Quick Help

Toview Quick Help

1 Press Help key to enable the quick help message,then press the key or softkey for which you would like

to view help.

QuickHelp remains on the screen until another key is pressed or a knob is turned.

Help Key help information

Open the Help Information bypressing the Help key. The help message will be displayed after pressing the

key, softkey, or knob on the front panel.

To close the Help Information,simply press the Help key.

Default Key help information

Press and release immediately theDefault key to perform the selected default settings.

Press and hold the Default key, theDefault Menu will be displayed.

Default setup - Return the scope toits default settings. Major default settings:

Horizontal: normal mode, 100us/divscale, 0s delay.

Vertical: channel 1 on, 5V/divscale, DC coupling, 0V position.

Trigger: Edge trigger, Auto mode, 0Vlevel, rising edge, 60ns hold off time.

Display: 100% grid intensity, 100%waveform brightness, persistence off.

Note: The waveform generatorsettings are not affected by Default setup.

Factory setup - Reset the scope toits default settings, and delete all settings saved by the user.

User setup - Returns the scopesettings to the user saved horizontal, vertical, trigger and display setup.

WisdomAugust

WisdomAugust