Title: 6022BL BAD EEPROM... [Print this page] Author: apocalips1234 Time: 2018-7-20 23:25 Title: 6022BL BAD EEPROM... Today i have received a new 6022BL, i have installed without troubles drivers... same with the program, but when activating "P" it doesnt work: device manager show a unknown device with id: USB\VID_04B4&PID_8613, after google search of this driver... and installed the driver: Cypress EZ-USB FX2 (68613) - EEPROM missing so i think is a hardware fault.
[attach]2203[/attach]
P.D: i have tried in 3 diferents pc, and with different usb ca
Author: amy Time: 2018-7-24 16:58
Sir, please send a message to our support email support@hantek.com Author: enzo65 Time: 2019-2-17 22:51
I have the same problem, until a few weeks ago it worked fine with saleae software Author: DavidPMTech Time: 2019-2-19 05:32
Same Problem:
Amy:
Would you be so kind as to help me?
I have a problem with the Hantek6254BD oscilloscope. The DRIVER does not install -- but the actual scope software does install.
Can you supply the correct driver?
Description:
The PID and Device ID appear to be wrong...
So the Scope software installs -- but the driver does not install. If I change the strings to match -- of course the driver is rejected by windows since it does not match the security string in the CAT file.
My device has:
04B5 and 8613 for the two codes -- not the o4B5 and PI_6CDE
My string in the USB identifier -- read from the SCOPE shows as
USB\VID_04B4&PID_8613
Your software is looking for this code.
[Device]
%VID_04B5&PID_6CDE.DeviceDesc% = Section, USB\VID_04B5&PID_6CDE
;for windows 2000 non intel platforms
Author: amy Time: 2019-2-22 08:43
Sir, please send a message to our support email support@hantek.com
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)