Electronic Engineer Discuss

Title: How to get sample rate from txt/csv for Hantek 6000EU Series? [Print this page]

Author: Hogeo Time: 2018-7-7 06:24
Title: How to get sample rate from txt/csv for Hantek 6000EU Series?
Edited by Hogeo at 2018-7-7 06:31

Hi All,

      I get your Hantek6254EU USB OscilloScope

Saved *.csv and *.txt file has no SampleRate Information.
      This is look like fatal to use. Could you check ?

*.csv
   #CLOCK=0.000500000
   #SIZE=2560
   #PROBE=0
   #VOLTDIV=9
   0.925490,0,0
   0.925490,0,0
   0.925490,0,0
   0.925490,0,0
   :

*.txt file
   #CHANNEL:CH1
   #CLOCK=200uS
   #SIZE=2560
   #UNITS:V

   -0.0157
   -0.0157
   -0.0157
   -0.0157
   :
I have one suggestion, I want a Information of  Trigger Edge    point.
   Major scope maker's *.csv file is saved by TriggerEdge Time = 0s.

            Thanks

Author: Newbee Time: 2018-7-13 08:21
Sir, please send a message to me caiyijun@hantek.com

Author: Hogeo Time: 2018-7-20 04:40

Hi All
My problem is solved.
  When the Time/Div <= 200ns, the sampling rate of each channel =    1GSa/s, 500MSa/s or 250MSa/s when 1ch, 2ch or 3ch/4ch activated
  When the Time/Div == 500ns, the sampling rate of each channel = 500MSa/s, 500MSa/s or 250MSa/s when 1ch, 2ch or 3ch/4ch activated
  When the Time/Div >= 1000us, the sampling rate of each channel = 250/(Time/div).
  No Buffer Length dependency.
  Sample Rate information is displayed on lower-right corner of bundled software.

Many thank you for the Hantek's staffs!!

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)