Title: DSO6204BD not recognised [Print this page] Author: PGorka Time: 2018-4-21 04:25 Title: DSO6204BD not recognised Edited by PGorka at 2018-4-21 04:28
Hello, i'm have Hantek USB Oscilloscope DSO6204BD.I'm encountered a problem, when i'm making measurements, software froze and the device was disconnect. After I reconnected it, it identifies as "Cypress Fx2LP No Eeprom Device". Input signal was far away from treshold to 35V. Red led not blinking, after connection to PC. I'm use Windows 10 x64.
Author: amy Time: 2018-4-23 16:39
Sir, please send a message to me caiyijun@hantek.com Author: PGorka Time: 2018-4-24 20:27
Thank You, after doing all what described in attachment, Oscilloscope work well. But now, i found trouble with DDS. Output look like wrong offset set to DAC. Author: PGorka Time: 2018-4-26 17:26
Ok, i'm play with Frequency of DDS, and look like all start work well. Thank You again.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)