Electronic Engineer Discuss

Title: Hantek MSO5202D - problems [Print this page]

Author: tempandrey@mail Time: 2018-4-16 20:47
Title: Hantek MSO5202D - problems
Hantek MSO5202D - problems:
1. Measurement of the frequency and period of the signal entering the D0-D15 logic inputs does not work.
2. The operation of the trigger on the front does not work correctly on the signal coming to the logic inputs D0-D15, namely:
a) the trigger menu is set to trigger on the rising edge, and the trigger is triggered on the falling edge;
b) the trigger menu is set to trigger on the falling edge, and the trigger is triggered on the rising edge.

Author: amy Time: 2018-4-25 09:42

Sir, sorry to reply you so late.
I have feedback these bugs to our engineer.
He will arrange to deal with it in a few days. Please wait for a while.

Author: tempandrey@mail Time: 2018-5-24 20:27
Edited by tempandrey@mail at 2018-5-24 20:35

I installed the latest firmware. Previous problems have been fixed, but with this firmware there is a new problem, the cursor measurement mode at the input of LA (D0-D15) has ceased to work - the oscilloscope hangs, does not react to pressing any keys.

Author: amy Time: 2018-5-29 13:58

tempandrey@mail replied at 2018-5-24 20:27
I installed the latest firmware. Previous problems have been fixed, but with this firmware there is ...

Sir, our engineers is revising. Please wait for a while.

Author: tempandrey@mail Time: 2018-7-10 21:48
Hello, when will the new firmware for mso 5202d appear?

Author: amy Time: 2018-7-19 09:55

tempandrey@mail replied at 2018-7-10 21:48
Hello, when will the new firmware for mso 5202d appear?

Sir, sorry, I have sent the firmware to your email.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)