Electronic Engineer Discuss

Title: 6022BL Drivers with button in P mode [Print this page]

Author: catami61 Time: 2018-1-22 23:03
Title: 6022BL Drivers with button in P mode

I have a problem with the 6022BL when installing the drivers with the button in P mode, the computer recognizes it with the USB ID \ VID_04B4 & PID_8613 instead of the corresponding VID_0925 & PID 3881 that corresponds to the Saleale and I can not install this software. Do you know what may be due?

Author: catami61 Time: 2018-1-23 15:04

Anybody from the hantek team give me an answer?

Author: amy Time: 2018-1-24 08:22

catami61 replied at 2018-1-23 15:04
Anybody from the hantek team give me an answer?

Sir, first please press down the button, and connect it to your computer.
And then update the driver.
This is the right way to use it.

Author: catami61 Time: 2018-1-24 16:04
Dear amy, with the button in H position (press down) everything is fine, computer recognizes the driver and can install the Hantek software without problems. The issue is with the button up (mode P), I can't install Saleae software.

Author: amy Time: 2018-1-24 16:46

catami61 replied at 2018-1-24 16:04
Dear amy, with the button in H position (press down) everything is fine, computer recognizes the dri ...

Sir, that's another interface that we don't use. It does not need to.

Author: catami61 Time: 2018-1-24 19:42

So what's the button exists

Author: finder Time: 2018-2-24 02:17
Hi Amy, I follow

Author: finder Time: 2018-2-24 02:19
Hi Amy, I followed your suggested steps to install the software and updated the driver Windows still report the driver have problem. It refuse to start the software. My window

Author: finder Time: 2018-2-24 02:20
My windows 10 is the latest version windows 10 pro 1709

Author: finder Time: 2018-2-24 02:21
I bought the HT6022BL almost 6 months still not working.

Author: amy Time: 2018-2-24 13:35

finder replied at 2018-2-24 02:21
I bought the HT6022BL almost 6 months still not working.

Sir, before it stop working, what operate system of your computer did you use?

Author: finder Time: 2018-2-24 17:04
Finally, r

Author: finder Time: 2018-2-24 17:05
Finally I install ednthe driver okay by perform the steps again step by dr

Author: ying Time: 2019-3-7 10:34

finder replied at 2018-2-24 02:20
My windows 10 is the latest version windows 10 pro 1709

Please download latest driver from our website: http://www.hantek.com/en/ProductDetail_2_153.html

Press P/H black button on the device. Then click right mouse "My Computer-Device Manger" to update driver.

Please refer to http://www.eediscuss.com/forum.php?mod=viewthread&tid=6895&extra=

If the problem remains, please click right mouse "My Computer-Device Manger" and send a screenshot to study.

Author: ying Time: 2019-3-7 10:35

finder replied at 2018-2-24 02:20
My windows 10 is the latest version windows 10 pro 1709

Please download latest driver from our website: http://www.hantek.com/en/ProductDetail_2_153.html

Press P/H black button on the device. Then click right mouse "My Computer-Device Manger" to update driver.

Please refer to http://www.eediscuss.com/forum.p ... tid=6895&extra=

If the issue remains, please click right mouse "My Computer-Device Manger" and send a screenshot to study

Author: ying Time: 2019-3-7 10:37
Please download latest driver from our website: http://www.hantek.com/en/ProductDetail_2_153.html

Press P/H black button on the device. Then click right mouse "My Computer-Device Manger" to update driver.

Please refer to http://www.eediscuss.com/forum.p ... tid=6895&extra=

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)