Electronic Engineer Discuss

Title: Firmware upgrade help on Hantek DSO5102P Oscilloscope [Print this page]

Author: hasjon Time: 2017-12-31 04:23
Title: Firmware upgrade help on Hantek DSO5102P Oscilloscope
Hello

I have an issue with my Hantek product:
   2 Chanel Digital Storage Oscilloscope 100 MHz
   Model: DSO5102P
   Serial Nr: T 1G/036 003279

Unfortunately, the device is not working properly. When it is switched on, first it displays the Hantek logo, and then this message is output:
--------------------------------------------------------------
  l    System update                                           l
l Please insert the USB device with update    l
l file witch can be obtained from the supplier l
l                                                                         l
l Warning, DO NOT turn off the power during l
l firmware update is running                            l
--------------------------------------------------------------
I tried to update the latest firmware file via USB stick (FAT32 formatted, only this file is written on it) "dso5kp_func_dso5102p20170714.up" (from Hantek) but the LED of the USB stick is continuously blinking with no visible activity on the oscilloscope screen (no firmware upgrade progress bar showing).

I then attempted to leave the USB stick in the oscilloscope and gave it a reboot.  Now the oscilloscope just keeps rebooting with no activity of any firmware upgrade.

Please can you help me to revive my oscilloscope.

Please find the following attachments:

Author: hasjon Time: 2017-12-31 08:00
Just to add to my above post, I have noticed that others have also experienced the exact same issue.

http://www.hantek.org/forum.php?mod=viewthread&tid=6986

Please can you share what and how was the remedy solution? I purhcased my unit in 2014. Can the manufacture or someone assist in anyway please?

Thanks

Author: amy Time: 2018-1-2 11:22

hasjon replied at 2017-12-31 08:00
Just to add to my above post, I have noticed that others have also experienced the exact same issue. ...

Sir, I have replied you via email, please check.

Author: hasjon Time: 2018-1-17 01:16
Edited by hasjon at 2018-1-17 01:18

[size=12.4799995422363px]Hi All
[size=12.4799995422363px]

[size=12.4799995422363px]Please see the attached pictures.
[size=12.4799995422363px]

[size=12.4799995422363px]I have successfully made serial connection with my Hantek DSO5102P, via USB to serial and the direct USB connection. Attempted to reflash. However after the reflash, the oscilloscope hangs after the reboot. Upon power up, the Hantek logo displays and after that nothing happens.
[size=12.4799995422363px]

[size=12.4799995422363px]Please see the attached screens shots from 'EmbedSkyDownLoadTool_V1.0'' and the terminal Running Information after transferring the file 'wh5 root_dso5102p3.ubi'.
[size=12.4799995422363px]

[size=12.4799995422363px]I believe I may have the wrong .ubi file. I may have a partition error and thus would also require a working backup from another DSO5102P. Please can someone provide a backup and help to convert to the correct .ubi file so that I can attempt a successful firmware reflash.
[size=12.4799995422363px]

[size=12.4799995422363px]Thank you

Author: amy Time: 2018-1-18 10:37

hasjon replied at 2018-1-17 01:16
Hi All

Sir, I ahve replied you via email, please check.

Author: megakai2 Time: 2018-8-10 16:18
Hi I was wondering if you have the solution to this? I have the same problem on my DSO5072P. Thanks

Author: sk_guest Time: 2019-1-19 20:46
Hello,
I also have exactly the same issue on my DSO5102P. Ser No T 1G/036 000948.
Please help me fix this issue.

Author: Shamil Time: 2020-1-6 03:59
What firmware for updating can I use on my device 5102P revision 1.0

Author: Shamil Time: 2020-1-7 02:24
Please answer my question. Will I be able to update the firmware of my device 5102P revision 1, firmware 150521 with the latest new firmware 191024.

Author: wangshuang Time: 2020-1-7 11:18

Shamil replied at 2020-1-7 02:24
Please answer my question. Will I be able to update the firmware of my device 5102P revision 1, firm ...

you can update the firmware to 191024.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)