Electronic Engineer Discuss

Title: HANTEK DSO5102P Не воспроизводит записи с usb flash [Print this page]

Author: sergey42 Time: 2017-12-22 20:21
Title: HANTEK DSO5102P Не воспроизводит записи с usb flash
Здравствуйте! Не получается воспроизводить с usb flash,записывает,но невоспроизводит файлы .rec- не открывается ни где ни на осциллографе ни на компьютере, имя файла -Record350.rec- на осциллографе высвечивается в низу надпись - нет действительных волновых данных для воспроизведения- записывал на usb flash размером 2гб файловая система fat 32 и ещё пробовал разные форматы и разные usb flash, тоже самое получается, Спасибо!

Author: amy Time: 2017-12-26 11:45

Sir, I can't understand waht you mean.
Please discribe in english agian. Thanks.

Author: sergey42 Time: 2017-12-26 22:53
Hello! Can not play with usb flash, writes, but does not reproduce files .rec- does not open anywhere on either the oscilloscope or on the computer, the file name -Record350.rec- on the oscilloscope is displayed at the bottom of the inscription - there are no valid wave data for playback - recorded on usb flash size 2GB file system fat 32 and still tried different formats and different usb flash, the same thing happens, thanks!

Author: amy Time: 2017-12-27 16:13

sergey42 replied at 2017-12-26 22:53
Hello! Can not play with usb flash, writes, but does not reproduce files .rec- does not open anywher ...

Sir, the .rec file only can be played by the scope.
Please press "Utility->system information" and give me a picture to study.

Author: sergey42 Time: 2017-12-27 19:49
Hello! Here's a video about the problem of playing .rec files from USB FLASH and sent you to the mail. Thank you!

Author: sergey42 Time: 2017-12-27 21:52
Edited by sergey42 at 2017-12-27 22:06

Here is a picture of the system information. Thanks!

Author: amy Time: 2017-12-29 14:45

sergey42 replied at 2017-12-27 21:52
Here is a picture of the system information. Thanks!

Sir, our engineer will modify this bug, please wait for a while.

Author: sergey42 Time: 2017-12-29 17:46
Good! Thank you very much, I'll wait!

Author: sergey42 Time: 2017-12-29 19:22
Edited by sergey42 at 2017-12-29 19:26

Hello! There are still problems with the display of information on the screen, the frequencies do not match, they show different values ??and in the screen where all information on the first channel should be displayed does not display the eight measurement values ??(photo 1.JPG), after displaying all measurements on the second channel, on the second channel displays all the measurements, then when switching to the first and the first shows all the measurements, Thank you!

Author: sergey42 Time: 2018-1-20 21:03
Hello! You sent me an update to the firmware from the version of hantek dso 5202p and I have an oscilloscope hantek dso 5102p, are you mistaken or is this correct? Thank you!

Author: amy Time: 2018-1-22 17:00

sergey42 replied at 2018-1-20 21:03
Hello! You sent me an update to the firmware from the version of hantek dso 5202p and I have an osci ...

Sir, their firmware is the same.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)