Electronic Engineer Discuss

Title: 6022BE Measures DC Voltage Incorrectly [Print this page]

Author: dlempar Time: 2017-11-30 13:17
Title: 6022BE Measures DC Voltage Incorrectly
I purchased a 6022BE which locks up in XY Mode and will not accurately measure
DC Voltage. It displays less than half of the voltage. EX: 12vdc shows on O-Scope

as 5V??? Can you help me resolve these issues?? I have already downloaded the
latest software.

Thanks-----------Donald

Author: amy Time: 2017-11-30 15:00

Sir,
The input protection voltage of Hantek6022BE is +/-35V (without external attenuation). So the maximum input voltage is +/-35V. If the input voltage is greater than +/-35V, the oscilloscope will be burnt out.
The maximum measurement vlotage is +/-5V (without external attenuation). If the input voltage is greater than +/-5V, greater than 5V signal will be cut off.
About the crash problem, our engineer is modifying, please wait for a while.

Author: dlempar Time: 2017-11-30 16:49
Thank You for the explanation. That makes sense

Author: olivelion Time: 2017-12-18 15:53
Hello,
HI have a similar problem with my Hantek6022BL
Yesterday, on my car, test the battery 12V charge with motor on and off.
Normaly, the voltage is 12.7V motor off, and 14.1V motor on.
Last handteck software 1.0.6 installed on windows 7 (the previous 1.0.5 was not stable)
The hanteck Hantek6022B display a value of 5V, without any change if the the motor is on or of.
When not connected to the battery, the value is 0V.
Thanks for help.

Author: amy Time: 2017-12-19 10:49

olivelion replied at 2017-12-18 15:53
Hello,
HI have a similar problem with my Hantek6022BL
Yesterday, on my car, test the battery 12V cha ...

Sir, please set the probe to 10× attenuation and set the software to 10× to measure.

[attach]1912[/attach] [attach]1913[/attach]

Author: filomeni Time: 2017-12-28 03:01
Hi,
I bought the 6022BE, with win 10 it does not work! Can you give me the drivers to make it work?
Thank you

Author: amy Time: 2017-12-28 10:39

filomeni replied at 2017-12-28 03:01
Hi,
I bought the 6022BE, with win 10 it does not work! Can you give me the drivers to make it work?
...

Sir, please download the driver in this link: http://eediscuss.com/forum.php?m ... tid=9012&extra=

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)