Title: Problems about DSO1062S [Print this page] Author: Jazper Time: 2017-9-7 09:58 Title: Problems about DSO1062S
Dear sir/madam,
I have the problem that the device cannot be shutted down properly. I tried to follow the steps of 6.16 of the user manual, however, the device needed to be rebooted everytime when i turn on the device. I also tried to update the firmware but failed to update.
Do you have any suggestions to solve the problem?
Regards,
Jazper Siu
[attach]1695[/attach] [attach]1696[/attach]
Author: amy Time: 2017-9-7 10:10
Sir, first, please downlaod the firmware on our website: http://hantek.com/en/ProductDetail_1_18.html
Copy it into the USB stick. Insert into your scope and click "Utility->Update" to update the firmware.
Before update, ensure the format of the USB stick is FAT32.
The situation in Figure 2 appears, that may be the firmware file corrupted.,
Please download and copy again.
Make sure the file copy is completed and then unplug the USB stick.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)