Electronic Engineer Discuss

Title: 6022BL win10 64bit driver [Print this page]

Author: cchowkar Time: 2017-8-9 20:08
Title: 6022BL win10 64bit driver
Hello
I am unbale to install the driver for 6022BL received with the CD. Attached is the error screenshot.
I am using Win10 build 15063 x64bit

Regards
Chins

Author: insomnia Time: 2017-8-10 05:46
Edited by insomnia at 2017-8-10 05:49

shift + (power button  >> click restart) >>  [ Troubleshooting  >> Advanced Options >>  Starting Settings >> Restart ],
[Press seven (7)] on dialog window after reboot , this will be disabled "driver signature" for  "Null"  driver...
Install  your driver,  otherwise create new "inf" or use "pnp installer".

[] = External Menu, not inside on running winos !
This work on 8.1 , maybe work win10

Author: amy Time: 2017-8-10 09:11

Sir, please download the driver to update in this link: http://eediscuss.com/forum.php?mod=viewthread&tid=9012&extra=

Author: cchowkar Time: 2017-8-10 12:44
Thanks.. i have downloaded the driver from the link and the same error repeats.
After following the below steps it works now.
1. Disconnect USB cable
2. Remove any previously installed drivers from device manager
3. Push the P/H button on back panel of USB scope
4. Connect the usb cable to PC. The unknown device gets listed in the device manager
5. Now follow the procedure to update the driver

Author: Chordail Time: 2019-8-8 22:54

amy replied at 2017-8-10 09:11
Sir, please download the driver to update in this link: http://eediscuss.com/forum.php?mod=viewthr ...

i still can not get my new scope running. can someone help me!

Author: amy Time: 2019-8-12 10:55

cchowkar replied at 2017-8-10 12:44
Thanks.. i have downloaded the driver from the link and the same error repeats.
After following the ...

Sir, please use this driver to try.

[attach]3079[/attach]

Author: amy Time: 2019-8-12 10:55

Chordail replied at 2019-8-8 22:54
i still can not get my new scope running. can someone help me!

What is the model of your scope?

Author: Chordail Time: 2019-8-15 21:46

amy replied at 2019-8-12 10:55
What is the model of your scope?

1008c is the model number

Author: amcik Time: 2021-3-1 23:03
neither of this works, still got code 52 why you people is not giving the right driver directly ???????

Author: arun.sh Time: 2021-12-20 00:40

amy replied at 2019-8-12 10:55
Sir, please use this driver to try.

Hello Sir
I downloaded these drivers, but they unsigned one.
I didn't installed the one because the older unsigned drivers was causing my Windows 10 PC to crash.
Can you please suggest what should I do?

Author: cakira Time: 2022-1-22 06:29
Hi!

I'm writing to report that after 2 days, I was finally able to run Hantek 6022BL in my Windows 10 Computer!!!

I did the following steps:

1) Disconnected the USB cable from Hantek device.
2) Downloaded the drivers from Amy's post Hantek6022BL_Driver.zip (the drivers that I'd already had didn't work)
2) Rebooted Windows in the "unsigned drivers mode" (*)
3) Opened Device Manager
4) Clicked in the menu Show / Show Hidden Devices
5) Searched for Hantek devices and uninstalled then all
6) Asserted that the device's button P/H was in the pressed state
7) Connected the USB cable
8) In device manager, I updated the drivers with the ones I had just downloaded. Note that Hantek 1 refused to update, but when I updated Hantek 2 (or something like it), both were updated.
9) I opened the software and voilà!!! It was working. :-D :-D

Awesome! Finally!

Thank you all!

(*) To boot in unsigned drivers mode, I followed the steps described by imnsonia:

shift + (power button >> click restart) >> [ Troubleshooting >> Advanced Options >> Starting Settings >> Restart ],
[Press seven (7)] on dialog window after reboot , this will be disabled "driver signature" for "Null" driver...

However, thy are better illustrated in Method 1 from the page: https://www.maketecheasier.com/i ... -drivers-windows10/

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)