Title: Hantek DSO4102C does not boot. [Print this page] Author: popov Time: 2023-10-2 04:33 Title: Hantek DSO4102C does not boot. Edited by popov at 2023-10-2 04:39
Hello! My oscilloscope failed to boot with the following error message in the UART console:
Failed to execute /linuxrc. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
Copy the Code
I have tried to recover, but it did not help. The recovery script finished with error message int the UART console:
tar: invalid tar magic
Copy the Code
This happend after I inproperly pressed power button several times so it does not fixed and switched off immediately.
The boot and recovery logs are attached [attach]5631[/attach].The version printed on the PCB is DSO4000C V1.02 2015-03
Please, help me to recover my oscilloscope.
Author: kevinmartin Time: 2024-2-7 14:38
The Hantek DSO4102C is a digital oscilloscope that is popular with hobbyists and professionals alike. However, there have been reports of DSO4102C not booting.