Title: Hantek TO1112C [Print this page] Author: Beidos Time: 2023-6-17 13:33 Title: Hantek TO1112C Hello, after the purchase, I decided to install an update, as a result, the device freezes on the home screen and does not start. What can be done?
Author: Jing Time: 2023-7-4 11:27
Dear Sir,
Is the machine stuck when it is turned on? Can it be turned on normally? What is the system information of the machine? Author: Giannis Time: 2023-7-7 02:20
I bougth a TO1112C (S/N: CN2241076000987)oscilloscope about 1 month a go. From the first day i have a self-discharce of the batteries, i tryied with 4 new Panasonic (3.4Ah) batteries but no change at all. My problem mentioned to Hantek also to Aliexpress( Meterk) , but no one really cares to help to find a solution. The oscilloscope has a hardware problem. Please tell me, where is the warranty of your products?I have a useless instrument in my hanfs and waiting for a respossible response fro you. Regarfs, Giannis Tzanis-Alex.Papanastasiou 32.Thessaloniki, Greece 54639. Author: Jing Time: 2023-7-20 14:40
Giannis replied at 2023-7-7 02:20
I bougth a TO1112C (S/N: CN2241076000987)oscilloscope about 1 month a go. From the first day i have ...
Dear Sir ,
May I ask what's wrong with your machine? Author: Giannis Time: 2023-7-29 16:46
With full charged batteries and the oscilloscope to OFF condition next morning the batteries are discharged. I tried with good quality(Panasonic green,3400mAh) but nothing change, sef discharged again, this is no batteries problem but 100% machine's hardware problem. I already mention-describe the problem(5-6) times, so please don't ask me again to describe it. Thanks. Author: Giannis Time: 2023-7-29 16:54
If it is a firmware problem please fix it. I heard this and other problems from a collegue to the univercity and deeply dissapointed, so he deside to go to Rigol oscilloscope, if you think this is good for you, then i don't have to say anything more, thanks again!!!!!! Author: 原来no Time: 2023-8-21 09:01
I think you should find a way to return it and purchase the latest 12bit oscilloscope from Puyuan. Why do I say that? Because I also bought a 1112, but I am very disappointed. It is a repaired product and the waveform noise is very loud. The staff has always emphasized that there is no problem. I have OCD and I would not want this kind of defective product.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)