Title: 6022BL LED meaning, and purpose of button? [Print this page] Author: 1Andy1 Time: 2022-12-11 06:31 Title: 6022BL LED meaning, and purpose of button? Edited by 1Andy1 at 2022-12-11 09:39
I have three questions about the 6022BL
The 6022BL has an LED, this blinks red if the 6022BE app is NOT running and blinks green when the 6022BE app IS running. What is the meaning of the LED? Should it blink or should be be on, and not blinking?
There is a small pushbutton switch near the USB connector labelled H and P. What is the purpose of this switch?
In the logic analyzer mode, how can a trigger be set, for example start the trace when channel 1 = 0, channel 2 = 1, channel 3 =0?
Thank you
Andy
Author: Jing Time: 2022-12-13 14:48 Edited by Jing at 2022-12-13 14:49
Dear Sir，
When the machine is connected to the computer, the light is red; When the machine successfully connects the software and runs successfully, the light is green.
When using oscilloscope function, press H/P key to run 6022BE software; When using the logic analyzer function, run the 6022BL software as H/P.
Please describe the problem with your logic analyzer in detail.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)