Title: Oscilloscope HANTEK DSO4084 stuck on QR code boot [Print this page] Author: rokor Time: 2022-11-11 06:08 Title: Oscilloscope HANTEK DSO4084 stuck on QR code boot Hi,
I own the oscilloscope Hantek DSO4084C and sudenly it stuck at QR code boot.
First I try to do the system recovery and did not help.
Then I connect my PC over the UART to the main bourd of the oscilloscope and check waht is going on.
The systems stops at
Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
Please see attached all booting process.
What can I do to recovery the system on osciloscope.
Thank you in advance
Author: Jing Time: 2022-11-11 15:41
Dear Sir,
Please provide the serial number of your machine. Author: rokor Time: 2022-11-12 02:10
Dear Sir,
Please download the file in the link below and follow the file to restore the backup operation.Please download the file in time with a deadline. https://www.filemail.com/d/bpwsjxovefrasdf Author: rokor Time: 2022-11-17 06:18
It works again. thank you for support.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)