Title: DSO2C10_Decode [Print this page] Author: pu6k1n Time: 2022-11-6 20:49 Title: DSO2C10_Decode Edited by pu6k1n at 2022-11-6 21:23
Got to the protocol decoder. I started testing the UART and got stuck. (I don't understand what I should see). 1. In the first case, from controlling two bytes in a row 0xAA and 0xBB using a computer terminal, I catch them with a donkey decoder when the "Synchronous decoding" display mode is on, I see these two bytes (the decoder is working). 2. In the second case, I send the same two bytes from the computer, but only on the donkey the "Monitor" display mode is enabled and I don't understand what's wrong here? What should be in the lines? After all, there should be two bytes, but they are not. Or does it work somehow differently?
Author: pu6k1n Time: 2022-11-6 21:29
Answering my own question above. Donkey decodes adequately in "Monitor" mode only when the trigger is in Auto mode.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)