Electronic Engineer Discuss

Title: HDM3055B capacitance [Print this page]

Author: Laurentq Time: 2022-10-1 02:06
Title: HDM3055B capacitance
I have an HDM3055B and all capacitors greater than or equal to 100uf measure 120uf, I started reading the manual and the maximum I can measure is only 100uf, why is this so?

Author: Jing Time: 2022-10-14 15:51

Dear Sir，
You mean you can measure the capacitance of 120 UF, right?

Author: Laurentq Time: 2022-10-24 08:14
Edited by Laurentq at 2022-10-24 22:55

only 100uf and if the value is higher it shows 120uf
in fact when joining the cables it measures 120uf

Author: Jing Time: 2022-10-25 13:38

Laurentq replied at 2022-10-24 08:14
only 100uf and if the value is higher it shows 120uf
in fact when joining the cables it measures 120 ...

Dear Sir,
If you can, please provide related video for our better reference.

Author: Laurentq Time: 2022-10-28 23:39
see video attached:
https://1drv.ms/v/s!Al3DDuQXXSGDkswjfk4YTXdofCpx1Q?e=1co747

https://1drv.ms/v/s!Al3DDuQXXSGDkswkIdoBR9ptE0B6VA?e=V7ufMt

Author: Jing Time: 2022-11-3 08:01

Laurentq replied at 2022-10-28 23:39
see video attached:
https://1drv.ms/v/s!Al3DDuQXXSGDkswjfk4YTXdofCpx1Q?e=1co747

Dear Sir，
According to the index, only 100uF can be measured at the maximum, and the capacitance within 100uF can be measured accurately. The maximum value displayed by the multimeter is 120uF. Therefore, the excess capacitance is displayed as 120uF.

Author: Laurentq Time: 2022-11-4 01:30
thanks for your reply, what a pity that it is like that, it only measures 100uf, for a multimeter of that capacity and quality

Author: Jing Time: 2022-11-4 11:47

Laurentq replied at 2022-11-4 01:30
thanks for your reply, what a pity that it is like that, it only measures 100uf, for a multimeter of ...

Dear Sir，
Thank you for your support.

Author: Laurentq Time: 2022-11-4 22:02
Is it possible to increase the capacitance measurement?

Author: Jing Time: 2022-11-9 14:47

Laurentq replied at 2022-11-4 22:02
Is it possible to increase the capacitance measurement?

Dear Sir，
Sorry, the maximum capacitance that can be measured cannot be increased due to the design of the circuit.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)