Title: Save pictures without showing the toolbar [Print this page] Author: titomelli Time: 2022-8-20 13:25 Title: Save pictures without showing the toolbar I have a DSO4204C and I need to save pictures of the measurements I take in the USB stick.
How could it be done without saving also the toolbar in the picture?
It's not professional to show this toolbar with the results I take at the work.
How can it be solved?
Best regards Author: Jing Time: 2022-8-22 21:50
Dear Sir，
Please provide relevant videos where the machine save function is not working, you can send an email to support@hantek.com. Author: titomelli Time: 2022-9-2 01:47 Edited by titomelli at 2022-9-2 01:50
Hello,
Please find attached the picture.
Is it possible to save pictures without saving also the toolbar on the right side?
Dear Sir，
After the machine is plugged into the USB device, after long pressing the Save/Recall button, the machine will save the picture to the USB. Author: titomelli Time: 2022-9-9 20:26
Hello, this is exactly what I needed. Thanks a lot for the support. Best regards
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)