Electronic Engineer Discuss

Title: In the logic analyzer mode of the Hantek MSO5202D oscilloscope, the Edge, Sl... [Print this page]

Author: CYH2018 Time: 2022-6-16 00:26
Title: In the logic analyzer mode of the Hantek MSO5202D oscilloscope, the Edge, Sl...

Hello!

I found that in the logic analyzer mode of the Hantek MSO5202D oscilloscope, the Edge, Slope trigger does not fire on the same edge as for the analog inputs CH1, CH2 or for a separate EXT TRIG input.

Namely, when Slope is set to Rising, the trigger from CH1, CH2 or EXT TRIG fires, as expected, on the rising edge.

But when the trigger is set to fire on the inputs of the logic analyzer D0, D1 or D2, everything happens exactly the opposite - the trigger fires in Rising mode on a falling edge, and in Falling mode - on a rising edge.

Author: CYH2018 Time: 2022-6-16 00:31
Dear Sir,

Greeting from Hantek.

We will send you an upgrade package tomorrow, please upgrade the firmware of the instrument, and please send us your machine software version information. Please click Utility---System

Have a nice day.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)