Electronic Engineer Discuss
Title: DSO5102B firmware updates fail with 0xfe [Print this page]
Author: crazyfreebsd Time: 2022-6-8 01:56
Title: DSO5102B firmware updates fail with 0xfe
I’ve tried upgrading the firmware on my DSO5102B using the files below, and both resulted in 0xfe errors (no update file found).
dso5kb_func_dso5102b20140610.up
dso5kb_func_dso5202b20190830.up
These firmware files were obtained from the Hantek website.
I tried multiple FAT32-formatted 1GB & 8GB USB flash drives. The flash drives are otherwise operational with the scope. I can save waveforms and screenshots to USB ok. I've reformatted so the only file present is the firmware up file. No luck.
Any help would be appreciated.
Scope S/N: T 1G/012 005459
SW version: 2.06.3 (120224.0)
HW version: 0x555583e8
Thanks
Author: crazyfreebsd Time: 2022-6-29 10:19
Up Up Up Up Up
Author: Jing Time: 2022-6-30 16:53
Dear Sir,
The version on the official website is dso5kb_func_dso5102b20190830.up. Did you download it right?
http://hantek.com/products/detail/3
Author: crazyfreebsd Time: 2022-7-1 05:50
Yes, I have download the last firmware (dso5kb_func_dso5102b20190830.up) in different computers, but always resulted in 0xfe error.
Any help would be apreciated.
Thanks.
Author: crazyfreebsd Time: 2022-7-7 05:15
Up up
Up UP Up
Author: crazyfreebsd Time: 2022-9-6 19:19
Reviewing the forum I have found a similar topic:
https://www.eediscuss.com/forum.php?mod=viewthread&tid=14805
In this post a member sends a alternative firmware compatible that solves the problem.
But this firmware is for DSO5202B. Amy or anyone has alternative firmware for DSO5102B?
Thanks
Author: crazyfreebsd Time: 2022-10-31 17:24
Up Up Up
Up UP
Author: amy Time: 2022-11-2 09:00
Your oscilloscope version is too old. Updating the firmware may cause it to fail to start.
Author: crazyfreebsd Time: 2023-3-8 17:48
Thanks for the information amy
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/) |
Powered by Discuz! X3.2 |