Title: Hantek 2D82Auto [Print this page] Author: LSM Time: 2021-9-19 07:02 Title: Hantek 2D82Auto Hello! I have a problem with my 2D82. After a failed update and a failed resuscitation, my oscilloscope pretends to be 2Dxx. ARM firmware file required. Please, help. Author: amy Time: 2021-9-23 13:39
Please upload the picture of system information to study. Author: LSM Time: 2021-9-29 19:51
Hi Ami. I downloaded the DFU file with the standard utility "HT2000Update.exe" in "local files" mode from here: https://forum.nickbel.com/index. ... opic=5.0;attach=553
And my device is displayed as 2D82.
When you try to update the utility from the network gives something like "incorrect network data, try later" Is it because of the wrong serial number? Author: LSM Time: 2021-9-30 23:37
Hi Ami. I downloaded the DFU file with the standard utility "HT2000Update.exe" in "local files" mode from here: https://forum.nickbel.com/index. ... opic=5.0;attach=553
And my device is displayed as 2D82.
When you try to update the utility from the network gives something like "incorrect network data, try later" Is it because of the wrong serial number? Author: LSM Time: 2021-10-2 15:24 Author: LSM Time: 2021-10-2 15:51 Edited by LSM at 2021-10-5 16:39
