Title: Hantek DSO 2D10 the frequency counter shows incorrectly [Print this page] Author: Koloholm Time: 2021-5-20 00:07 Title: Hantek DSO 2D10 the frequency counter shows incorrectly Edited by Koloholm at 2021-5-20 03:48
Hantek DSO 2D10 the frequency counter shows incorrectly, the built-in frequency counter shows the signal frequency 2 times less than the real one, for example, if you connect the oscilloscope input to a calibrator or generator, it shows a frequency of 500 Hz, although the frequency of the generator is 1 kHz, and so on at all frequencies.
Author: amy Time: 2021-5-20 08:47 Edited by amy at 2021-5-20 16:29
Author: Koloholm Time: 2021-5-20 13:21
what kind of firmware you need to specify so that there are no glitches in it later Author: amy Time: 2021-5-20 16:30
There is only one latest firmware file in the link. Author: Koloholm Time: 2021-5-20 20:07 Edited by Koloholm at 2021-5-21 16:11
Many users of these oscilloscopes complain that other glitches appear after flashing.
Author: Koloholm Time: 2021-5-22 22:04
after flashing it worked fine
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)