Title: 2D72 DMM spoiled [Print this page] Author: FatBoy Time: 2021-5-12 21:48 Title: 2D72 DMM spoiled Edited by FatBoy at 2021-5-12 21:49
Hello, my 2D72 cannot measure high voltage. Is there a fuse I need to replace? It can only measure low battery voltages like 9V or 3V. If I use it to measure 60V, it says 0.000mV. Same for AC measurement, I plug into the mains and it shows -0L.
Any help greatly appreciated. Thank you.
Author: amy Time: 2021-5-13 13:14
Please refer to this post.
From the photo, do you think R12 is also burnt? Author: FatBoy Time: 2021-5-14 15:24 Edited by FatBoy at 2021-5-14 15:26
Hello Amy, I have a problem. The shops in my country don't sell SMD resistors & definitely don't have resistors with tolerance of 0.1%.
Where can I buy those? Do you sell these parts?
Thank you for your help.
Author: amy Time: 2021-5-18 10:13
We can send them to you, but the freight is expensive.
Maybe you can purchase them on aliexpress. https://www.aliexpress.com/whole ... t=0603+SMD+Resistor Author: FatBoy Time: 2021-5-18 12:13
Hello Amy, what is the shipping charges like? I'm in Singapore, usually when I buy things from aliexpress, light items the shipping is about SGD5.
I've checked aliexpress, min order quantity for the resistors is 100pcs per resistance value, so if I order R12, R13, R14 & R15 that would be 400pcs total. So I don't know what to do with the remaining 396pcs after I repaired the DMM.
Please let me know your shipping charges. Thank you. Author: FatBoy Time: 2021-6-8 11:49 Edited by FatBoy at 2021-6-8 11:52
Hello Amy, can you sell me the parts please? The parts with such tight tolerance are impossible to find. With 0.1% tolerance at 1/16W, and value of 101K ohm, I cannot find it in Aliexpress or ebay.
Thank you.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)