Title: DSO6254BC when connected, a blue screen is obtained. [Print this page] Author: AlexSVC Time: 2021-3-10 23:41 Title: DSO6254BC when connected, a blue screen is obtained. Edited by AlexSVC at 2021-3-11 03:22
When it worked (just lying not connected anywhere) it stopped being detected. After installing the drivers from the site (new), when connected, a blue screen is obtained.
After rebooting, it says that the driver is not installed.
I ask for help.
Now, when I connect, it is recognized in the list of devices, but when I try to install the driver, everything hangs.
I found the firmware for the FPGA, but the program does not see the oscilloscope, like the main program.
I connected it to another laptop, when the driver is installed, the laptop freezes. But there is no blue screen. It can be turned off.
I wanted to make myself a birthday present, but something went wrong.
Author: OASJ2YSeeEhBQo1 Time: 2021-3-11 07:47
Replace the USB cable and see if it solves the problem. Author: AlexSVC Time: 2021-3-11 14:54 Edited by AlexSVC at 2021-3-11 15:55
I have replaced the cable. This did not solve the problem. Exactly the same blue screen when trying to install the driver.
I checked the presence of voltages and the operation of the DC-DC converters with my old oscilloscope, I did not find any problems.
When it plug in USB, led is blinking.
The fact that the problem is in the oscilloscope can be said that it did not start on the laptop, where it worked before the failure. That is, nothing changed on the laptop, but the oscilloscope did not work.
I think the problem is either the firmware of the CY7C68013A or Spartan 6. Since the oscilloscope was running a little before stopping. Are there ways to try to reflash them? If I need a programmer, then I am ready to purchase it. I really want to restore it, I regret the money spent.
Author: CYH2018 Time: 2021-3-15 09:44
Dear sir,
Please download the following connection file to update the FPGA program of your machine. https://fil.email/cV69G0cT
Please note: this connection can only exist for 7 days Author: AlexSVC Time: 2021-3-15 17:36
Thank you, the oscilloscope is alive!
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)