Title: hantek 6074BC show a tension DC different of real [Print this page] Author: marcougo Time: 2021-2-26 01:43 Title: hantek 6074BC show a tension DC different of real Hi there, I took some photos to show the problem...I?m metering a tension near 12V DC, but the hantek 6074BC show a tension DC different of real, in paralel I put two meter tester to make a comparation, and you can see it at the photos in annexed....the configuration of Scope is: VOLT DC: 2V/DIV, TIME: 1.000S AND PROBE: 1X. Please could you explan me what is happen?, is it a inside problem from Scope?, thanks, marco Reis
Author: QMESAR Time: 2021-2-26 01:48
Hi
Did you try to do a calibration go Utilities >> Calibration
Did you try to do a calibration go Utilities >> Calibration
Hi there,
Yes man, several times and with differents probes rs, and made theses troubleshooting all 4 channels....I?m thinking the Scope has an inside problem.
Thanks for your help.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)