Electronic Engineer Discuss

Title: Quick question DSO1200 [Print this page]

Author: amy Time: 2020-12-25 10:03
Title: Quick question DSO1200

Customer Consultation

Hi there!,

I was wondering if you might be able to help me out with this question , I’ve got a handled oscilloscope DSO1200. Can I read 1000 VAC through the channel 1 in order to see a 20 Khz sinusoidal wave?

I’ll really appreciate your feedback.

Thank you!

Author: amy Time: 2020-12-25 10:06
Reply

The oscilloscope cannot directly test 1000VAC signal, you need to use a 100 times attenuation probe to test.

Author: 李继春 Time: 2020-12-25 10:26
Edited by 李继春 at 2020-12-25 13:41

示波器探测的振荡电压是0.1V，电压再低就测量不出波形了，但很多晶振都是工作在100MV以内的，或远小于0.1V，这种情况我们怎么测量波形呢？我把探头和示波表改为X1，这样最低电压可测量10MV振荡波形。

。低于10MV波形，2D72示波表将无法测出。大家有没有办法测量出1MV电压振荡波形。如果有请指导一下。

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)