Electronic Engineer Discuss
Title: DSO3064A HELP [Print this page]
Author: amy Time: 2020-11-25 10:27
Title: DSO3064A HELP
Edited by amy at 2020-11-25 10:28
Customer Consultation
Dear Ladies and Gentlemen,
I have used a HANTEK DSO3064A for years and purchased a new test-tip recently to test on 220 Grid Input. With that I had a male function and Capacitor on the BNC Input had a short to ground and also USB Output the inductor to ground was open.
Is it possible to get a schematic of the DSO3064 that I can do the repair. Or minimum some test points and schematic parts of Input and USB interface.
Thank you very much for your support.
Regards
Reply
Please check whether the motherboard is burnt out. And upload a picture to study.
[attach]3996[/attach]
Author: NahwelX Time: 2020-12-4 02:53
Hi Amy .. do you have the dump of the eeprom 24LC64? or the firmware to update the FGPA? Thanks Atte Nahuel Ribba. -
Author: amy Time: 2020-12-4 10:14
Please check the version number on the motherboard.
Author: NahwelX Time: 2020-12-4 21:09
Hello, thanks for answering..! DSO306XXX rev. 1.04.
D02000930
Author: NahwelX Time: 2020-12-4 21:22
E204460
M1 S 94V-0
241 2
Author: amy Time: 2020-12-17 16:11
Please send a clear picture by email caiyijun@hantek.com
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/) |
Powered by Discuz! X3.2 |