Title: 6022BE [Print this page] Author: Pentaxman Time: 2020-10-30 06:04 Title: 6022BE Please help me.
I have just purchased the above unit.
I have loaded the software and updated the driver as has been suggested in other threads.
In device manager the unit shows up as Hantek 6022BE Driver 2 with no yellow explanation marks or errors showing.
I have used a hand held unit to confirm I have an output on the test connections.
My unit has no button on it to select H/P but it does have a red light on it which is continuously flashing.
Connecting both probes with their earths to the test points, I get no traces on the display.
I am running Windows 10 Home, Version 1903, build 18362.1139
I have also run it under Windows 7 Pro on the same PC with the same issue.
Any ideas?
Author: Pentaxman Time: 2020-10-31 04:03
Tried again today on a different W7 laptop, same results although I can no longer get the flashing red light when connected to any of the computers I have tried.
Win7 system:
Please download the driver from the link: http://www.hantek.com/products/detail/31 Author: Pentaxman Time: 2020-11-1 00:34 Edited by Pentaxman at 2020-11-1 22:53
Appologies for the repeat post.
I have tried both of those drivers with no change, still no test output and no flashing red led.
I have tried both of those drivers with no change, still no test ou ...
Please click right mouse "My Computer->Device Manager" to send us a screenshot to study.
Also, you can send the issue to email: support@hantek.com Author: Pentaxman Time: 2020-11-15 01:52
I have found the issue.
None of the drivers you supply are recognised as being certificated by Microsoft for use with W10.
I can only make it work by switching off driver verification.
Not impressed in the slightest, so I have now switched to OpenHantek which operates correctly with verified drivers
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)