Title: 5102P broken screen [Print this page] Author: fbn Time: 2020-9-15 03:24 Title: 5102P broken screen Hello,
I broke the screen of my DSO5102P.
The original LCD is a JWSYT1705076281 (code written on cable) or YCY07057100A5-15L (code written on sticker) but I cannot find one to buy.
I've tried with an AT070TN92 as suggested in other threads but it does not work.
What options do I have to change the screen?
thanks
Author: wangshuang Time: 2020-9-15 11:22
Please download the latest firmware to upgrade(Utility->Upgrade) to solve the time issue.
Download link: http://hantek.com.cn/products/detail/16178
It is not recommended to tear off the LCD screen protective film. If you really want to tear it off, you can pull the red end hard to tear it off. Author: fbn Time: 2020-9-15 13:51
It is not a firmware issue. The LCD is physically broken because it was hit with something and cracked. I need to replace it but I don’t know where to find the same model or a compatible one. Author: fbn Time: 2020-9-17 23:03
Any help please?
The LCD adapter version is 1.00.2 2015-12.
Which models of LCD are compatible? Author: wangshuang Time: 2020-9-23 16:14
fbn replied at 2020-9-17 23:03
Any help please?
The LCD adapter version is 1.00.2 2015-12.
Which models of LCD are compatible?
Neutral TN92. Liquid crystal
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)