Title: DSO4254B Not Work, recovery failed [Print this page] Author: ccortesc Time: 2020-7-24 23:12 Title: DSO4254B Not Work, recovery failed Edited by ccortesc at 2020-7-25 09:48
On July 7, I wrote to technical support, because my hantek DSO4254B stopped starting, the screen remains black after showing the hantek logo, when pressing F2, it said, failed recovery, they answer me and they refer me the Next link https://www.eediscuss.com/forum.php?mod=viewthread&tid=14831&extra= I did what I was saying, which is to extract the file in a USB and then go to hantek and choose the F3 option, the process starts, the device restarts, but the same thing happens again, it does not start, I will comment on what happened and for 10 days they did not answer me anymore.
I need to repair my problem !!
Author: wangshuang Time: 2020-7-29 10:42
Please refer to the instruction and give us the running information to study. https://fil.email/PFAy9HIk
Author: cmsgraham Time: 2021-5-14 04:25
I have the same problem, my unit is showing nothing after reboot, at the begin it shows the options to restore, I selected restored, it looks like it runs the restored but nothing else happens. Now I turn it on and black screen all the time, I press the button to on and inmediately off and then on to supposely to make the system restore but same, no action, no nothing. Thanks for your help.
Author: amy Time: 2021-5-14 16:37
Please send some pictures to us support@hantek.com to study.
Author: Steve007iii Time: 2021-7-19 02:07 Edited by Steve007iii at 2021-7-19 07:42
I have the same problem, the screen went black
The nand files are corrupt
Also the recovery ones to solve this we need a copy of the complete Nand, you need a nand programmer and reprogram it...
But first we need
#1 A person with this device working in perfect condition.
# 2 And with a Nand programmer to donate all his information to us ...
This should solve any problems regarding: boot, firmware, recovery, and OS problems ...
