Title: Hantek HT25 COP probe setting in software [Print this page] Author: mazzerman Time: 2020-6-8 18:44 Title: Hantek HT25 COP probe setting in software There is no HT25 COP probe setting in the 1000C software that i have, also do you use an attenuator with the probe or is it built into the probe?
Author: wangshuang Time: 2020-6-9 15:48
The attenuation ratio of HT25 is 10000:1, just select X10000 in the software. Author: mazzerman Time: 2020-6-10 20:54