Electronic Engineer Discuss

Title: dso8060 will not turn on [Print this page]

Author: murray.adams Time: 2020-4-5 11:45
Title: dso8060 will not turn on
my dso 8060 cut out and now when i press the power button i just get a single beep. i tested the battery and it reads full and i plugged in the power supply and still i get the same thing . any ideas?

Author: wangshuang Time: 2020-4-7 16:46
Please contact your seller to return factory for repair.

Author: murray.adams Time: 2020-4-7 17:24
the seller does not exist anymore

Author: murray.adams Time: 2020-4-8 18:51
can i ppost it to the factory to be repaired

Author: wangshuang Time: 2020-4-9 14:45
Please give me your dso 8060 serial number. My email address, wangshuang@hantek.com

Author: Valsic Time: 2022-11-10 22:36
Hello, Our DSO8060 don't turn on, when press the power button nothing happens. It was bought from Amazon three years ago. It has hardly been used. The Hantek distributor in Spain has not wanted to give us assistance. Naturally we have checked the battery and the power supply and everything is fine. If we had the schematic we would try to repair it. What can we do?

Author: Jing Time: 2022-11-11 15:47
Edited by Jing at 2022-11-11 15:50

Valsic replied at 2022-11-10 22:36
Hello, Our DSO8060 don't turn on, when press the power button nothing happens. It was bought from Am ...

Dear Sir，
Test the values of each point according to the picture. And provide test results.

Author: fer Time: 2023-9-1 06:28

Jing replied at 2022-11-11 15:47
Dear Sir，
Test the values of each point according to the picture. And provide test results.

I have the same issue and all voltages are wrong. It suddenly stopped working.

What could it be? Could you help me?

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)