Title: Old Sofware Hantek 1008C [Print this page] Author: rperissutti Time: 2020-2-9 03:24 Title: Old Sofware Hantek 1008C When I made the purchase of this oscilloscope it came with a more complete software with more functions and keys, now it is simpler but I cannot take advantage of it as before.
Is there somewhere to download this old software?
Thank you
Tarde pero seguro, MUCHAS GRACIAS AMY Author: IseetwoI2Cs Time: 2021-8-27 07:03
I may be a year late tothis post, but just wanted to say Thank you for posting this....
This 1008C scope has so much potential, but someone in Hantek Software Development dropped the ball on version 1.0.30. It is beyond buggy..
Can't reliably record waveforms or save data in 1.0.30. Sometimes some data is saved, sometimes no data is saved. And the Run \ Stop Button is reverse. You have to click the Red Stop button to run and then click the Green Play button to stop... Very confusing.
Will try 1.0.12 Author: icb Time: 2021-9-13 01:14
I couldn't agree more. This software is so out of date now and was at best a minimum effort. This is a very cheap scope but as the previous poster said it has potential. Drop the number of input channels to 4, increase the bandwidth, and re-write the software to at least be partially competitive wit the picoscope. Modern auto diagnostics devices like this need more complete recording functions, the ability to record and play back measurement data, i.e. rms values, or pulse width values, or at least be able to make new measurements on the playback, the ability to zoom inor zoom out on the recorded waveforms, the ability to control buffer lengths, trigger HF filtering, AC couple the inputs, and way less glitches and general overall increased stability. This product could take over the market from the picoscope but you are doing nothing with it. Author: DP866 Time: 2021-9-15 01:29
Agree, the delivered software was weak and needed lots more development. Found a cool android application has a great scope GUI. Not free but a bargain.