Title: usage of 8050 probe [Print this page] Author: wangshuang Time: 2019-12-31 09:48 Title: usage of 8050 probe Question:
How to correctly connect and comfortably use an hantek HT8050 probe which is 1/50 or 1/500 attenuation with dso5102p (or any of Hantek oscilloscope) which support only 1/1or 1/10 or 1/100 or 1/1000 attenuation settings. Please let me know quickly.
Author: wangshuang Time: 2019-12-31 09:53
After the high voltage is attenuated by the HT8000 probe, it can be directly connected to an oscilloscope with an appropriate attenuation ratio, select the appropriate attenuation ratio according to the voltage after being attenuated.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)