Title: Hantek DSO5102P Error Code 0xc00 [Print this page] Author: johnodonahue Time: 2019-12-29 11:09 Title: Hantek DSO5102P Error Code 0xc00 Scope powers up and appears to work, but waveform is off scale at top using 5V@1KHz reference. Rotating vertical position knob makes trace visible briefly. Measurement display showing 94 volts. Using separate 4MHz oscillator shows similar result. 5V@1KHz reference signal looks correct on older analog oscilloscope. Self Calibrate gives Error Code 0xc00 at step 2/38
Author: wangshuang Time: 2019-12-31 08:06
Please send a photo of the product information in Utility to my e-mail: wangshuang@hantek.com Author: luis67 Time: 2020-8-11 00:40