Electronic Engineer Discuss

Title: New DSO5102P firmware [Print this page]

Author: loole Time: 2019-12-10 02:10
Title: New DSO5102P firmware
Hi! I have a DSO5102P with firmware 3.40.0(180120.0). The 2019 firmware is now available for download. Is there a need to update, what changes, what some release notes, at least something.Is there a description somewhere?

Author: wangshuang Time: 2019-12-10 15:54
sorry. New firmware fixes known issues, optimizes some features, and does not provide release notes for the time being, the latest firmware version is 20191024. Users can download it in Hantek official website: http://www.hantek.com.cn/en/ProductDetail_3_26.html

Author: loole Time: 2019-12-10 19:17
Thanks, but it's weird, how programmers report to their bosses
-We fixes known issues, optimizes some features... What kind? We will not tell you, where's our money?

Author: wangshuang Time: 2019-12-11 10:53
The new version fixes the grid line display problem of the previous version of the fft function.

Author: urbanmiro@gmail Time: 2020-1-17 04:11
I uploaded the firmware 20191024. There is probably new bug now. If the trigger is stopped (red light) then the value in the bottom left corner of the screen does not change during switching Volts/div knob. Do you have the same?

Author: amy Time: 2020-1-20 14:25
Thank for your feedback. I have fed back to the Engineer for modification.

Author: Alex64 Time: 2020-4-20 17:19
Edited by Alex64 at 2020-4-20 17:30

Hi amy,
I found a new bug, quite annoying, the automatic measurements don't work on a captured (stopped trigger) image.So each time I want to measure an existing captured data, I have to do it manually, knowing that cursors are very slow ang sluggish to move...
But worst is that the cursors also won't track the captured data if trigger is stopped ?!

Please try to fix this.

Author: marvin Time: 2020-4-29 21:04
Hi new bug. Cannot select Vertical knob to 5V/div. When I choose this displaying wave disappear.

Regards
Dan

Author: wangshuang Time: 2020-5-11 16:57

marvin replied at 2020-4-29 21:04
Hi new bug. Cannot select Vertical knob to 5V/div. When I choose this displaying wave disappear.

R ...

After the channel is closed, the corresponding channel information will be closed accordingly.

Author: marvin Time: 2020-5-12 04:06

wangshuang replied at 2020-5-11 16:57
After the channel is closed, the corresponding channel information will be closed accordingly.

I have connected generator whole time. When select 5V/div wave is displayed only 1s and disapear. If I select 2V/div,
all is OK.

Dan

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)