Electronic Engineer Discuss

Title: Hantek 6022BE issue [Print this page]

Author: mbzadegan Time: 2019-11-20 11:59
Title: Hantek 6022BE issue
Hello every one,
I have installed The website's final driver for Hantek 6022BE and install correctly that report correct installing in my Control Panel.
But still when I run the program, at the left-bottom message me: Searching Device...
My Windows is 10 and My driver version is 1.3

How can I resolve this problem?

Author: wangshuang Time: 2019-11-20 14:30
does your device manager have a yellow "!"?If there is,you didn't install successfully.Try to refer the driver operation file to uninstall and reinstall.
http://www.hantek.com.cn/en/ProductDetail_2_31.html

Author: mbzadegan Time: 2019-11-20 15:28
Excellent
My Problem is resolved
THanks alot

Author: Vic Time: 2020-1-13 20:49
Hi,
I am seeing the same problem with my new 6022BE. However, I do not have an exclamation next to my driver, it says its working correctly. I installed the drivers from the included CD, and also the one off the Hantek website, but same result. i.e. the software just shows "Searching device..." I also have a flashing red light on the unit, next to the CH1 input.

I am running Windows 10 pro version 1903 OS Build 18362.356

Please advise.

Thanks

Author: ying Time: 2020-1-16 16:51

Vic replied at 2020-1-13 20:49
Hi,
I am seeing the same problem with my new 6022BE. However, I do not have an exclamation next to m ...

Please download the driver from the linK: https://www.eediscuss.com/forum. ... 12&highlight=16
Then click right mouse "My Computer->Device Manager" to update the driver.

Author: Vic Time: 2020-1-16 18:19
Hi,

Thanks for the quick response. Unfortunately, I still have the same issue. I tried to clean up all the device drivers after Uninstalling from device manager, as follows: deleted all Windows\INF\oem*.* files, then Windows\System32\drivers\Hantek*.*, and also cleaned up the DriverStore folder, removing hantek drivers. When I plugged in the module, I was back at "Unknown device", then Updated Driver from the files copied from the URL you provided. Here is what Event Viewer shows:

Information 16/01/2020 8:52:38 PM Microsoft-Windows-Kernel-PnP 400 None "Device USB\VID_04B5&PID_6022\6&2bb760e&0&1 was configured.

Driver Name: oem13.inf
Class Guid: {79046022-7904-7904-1980-198007056022}
Driver Date: 01/01/1601
Driver Version: 0.0.0.0
Driver Provider: ODM
Driver Section: Hantek6022BE2.Dev.NTamd64
Driver Rank: 0xFF0001
Matching Device Id: USB\VID_04B5&PID_6022
Outranked Drivers:
Device Updated: false
Parent Device: USB\VID_8087&PID_0020\5&3962a04f&0&1"
Warning 16/01/2020 8:52:38 PM Microsoft-Windows-Kernel-PnP 442 None "Device USB\VID_04B5&PID_6022\6&2bb760e&0&1 was not migrated due to partial or ambiguous match.

Last Device Instance Id: USB\VID_0483&PID_A0CB\0000001
Class Guid: {745a17a0-74d3-11d0-b6fe-00a0c90f57da}
Location Path: PCIROOT(0)#PCI(1A00)#USBROOT(0)#USB(1)#USB(1)
Migration Rank: 0xF000FFFFFFFF0033
Present: false
Status: 0xC0000719"
Information 16/01/2020 8:52:38 PM Microsoft-Windows-Kernel-PnP 430 None Device USB\VID_04B5&PID_6022\6&2bb760e&0&1 requires further installation.

But I still get the flashing red light, and "Searching device..." in the app.

I must be missing something :-(

Thanks,

Vic

Author: Vic Time: 2020-1-16 18:37
Edited by Vic at 2020-1-16 19:11

Ah. Problem fixed! I was starting the scope app from the desktop link that was installed by the installer. This was not working. But then I used the windows start menu, and started "Hantek6022BE" from there, it work fine!
Then I reinstalled the app, now the desktop link works too. Great.

Thanks,

Vic

Author: Taff Time: 2020-4-22 04:55
Is a driver available for Linux for this scope ?

Author: OASJ2YSeeEhBQo1 Time: 2020-4-22 07:54
Edited by OASJ2YSeeEhBQo1 at 2020-5-1 12:54

Taff replied at 2020-4-22 04:55
Is a driver available for Linux for this scope ?

There is no official support from Hantek for this device in Linux but, you can try the OpenHantek software:

https://github.com/OpenHantek/OpenHantek6022

It is an open source alternative and seems to work better than the official as it's constantly updated

https://www.eevblog.com/forum/te ... 2827418/#msg2827418

For Android, you can also try the HScope:

http://hscope.martinloren.com/

Author: Alvaro Time: 2020-4-29 12:43
Hola a todos
Tengo el osciloscopio hantek 6022BE serial 681020857, tengo el siguiente problema: Coloco la sonda en la salida de calibración de 2V -1kHz
y obtengo el gráfico de la foto 1, pero cuando se mide con la sonda, una batería mide 4.86Vdc donde realmente es 9.65Vdc, tiene una variación de 4.49Vdc

?Cómo puedo ajustar el factor de voltaje?

Nota: El valor RMS medido con un multímetro en la salida de calibración es 0.969V

Author: wangshuang Time: 2020-5-11 16:36

Taff replied at 2020-4-22 04:55
Is a driver available for Linux for this scope ?

Sorry, 6022BE operating system: Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA.

Author: wangshuang Time: 2020-5-11 16:42

Alvaro replied at 2020-4-29 12:43
Hola a todos
Tengo el osciloscopio hantek 6022BE serial 681020857, tengo el siguiente problema: Colo ...

Can you describe this problem in English or could you record a video so that we can better understand it.

Author: ying Time: 2020-5-21 14:49

Alvaro replied at 2020-4-29 12:43
Hola a todos
Tengo el osciloscopio hantek 6022BE serial 681020857, tengo el siguiente problema: Colo ...

The max. measure voltage is -5V~+5V without any attenuation. Please use probe with 10:1 attenuation to measure 9.65Vdc.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)