Electronic Engineer Discuss

Title: Usb 6104bc [Print this page]

Author: Appocalypsebr    Time: 2019-9-29 02:50
Title: Usb 6104bc
Hi i think my usb scope died, now I don't get the red light and windows does usb sound but don't detect the device. Noticed yellow light turns on 1 second and off inside the scope. But no luck, is there any way to troubleshoot via jtag or something? Thanks a lot.

Author: amy    Time: 2019-9-29 15:00
Please connect the scope to your computer and open the device manager, right click and select properties to check the PID and VID as the follow picture.
[attach]3174[/attach]


Author: Appocalypsebr    Time: 2019-10-2 04:06
Hi amy, the device is showing like unknown device, even with driver installed. Screenshot attached.

Author: Appocalypsebr    Time: 2019-10-2 04:08
And it dont click any more when i connect in the computer, something seems dead or firmware corrupted.

Author: Appocalypsebr    Time: 2019-10-2 20:23
Searching for this Hardware ID i found cypress chip with no eprom, is that correct?

Author: Appocalypsebr    Time: 2019-10-4 03:07
Is there some way to write de eeprom?? Or not the problem?

Author: amy    Time: 2019-10-8 14:59
Please refer to this to operate.
[attach]3181[/attach]



Author: Appocalypsebr    Time: 2019-10-13 00:54
Any hope?

Author: Appocalypsebr    Time: 2019-10-15 23:15
Anyone have that eeprom?

Author: OASJ2YSeeEhBQo1    Time: 2019-10-16 10:20
Appocalypsebr replied at 2019-10-15 23:15
Anyone have that eeprom?

The solution was already given to you and you ignored it. Now, please, stop spamming ALL forums on the internet with the same request, that is annoying and only makes people less inclined to help you.

Author: Appocalypsebr    Time: 2019-10-31 02:37
Edited by Appocalypsebr at 2019-11-1 01:25

Sorry Amy, i am not spamming,
I did the CyConsole.exe it opens, i clicked EZ-USB but the next screen it don't let me clic any button, doing something wrong or it don't works on windows10?Screenshot
[attach]3226[/attach]


Author: amy    Time: 2019-11-5 15:16
You haven't installed the driver yet. The driver is in the attachment. Please install it manually.





Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/) Powered by Discuz! X3.2