Title: DSO4202C Equivalent Sampling [Print this page] Author: Vitaly Time: 2019-7-2 14:58 Title: DSO4202C Equivalent Sampling Hello, does anyone know how to use equivalent sampling on Hantek scopes, particularly on DSO4202C?
Author: Vitaly Time: 2019-7-4 00:27
In other words, I think eqi time on my oscilloscope doesn't work properly, I turn it on in the acquisition menu and nothing happens. Please help. Author: TMG Time: 2019-7-4 14:51
Hi Vitaly
Why do you thing that this scope has equivalent sampling mode?
Acc. to user manual are only real modes.
For bandwidth 100 MHz you have 1 Gs/s and 10 samples for period. Should be enough for present waveform correctly (more or less).
If you will have bandwidth 350 MHz and 100 Ms/s definitely you will need equivalent sampling for correctly presenting waveform.
Any way there is no information in user manual about different mode than real time. Do you have different?
I'm user of DSO4254C and would be nice to have equivalent sampling especially in 4 channel mode because then sample rate is reduced to 250 Ms/s and bandwidth is 250 MHz.
BR
T.
Author: Vitaly Time: 2019-7-4 15:39
Hi TMG, thanks for the reply
My scope has BW of 200 MHz, and equivalent sampling is still needed sometimes when you have to look at the periodic signal way over your BW and don't really care about its attenuation, more about the general waveform and/or the frequency, such as in my case.
Considering the manual, it seems that you have newer 4000B series, in which they (deliberately?) haven't added this feature, but official manual for DSO4000C series from their site explicitly states that the scope can provide equivalent sampling rate of up to 25 GSa/s, you can download it here http://hantek.com/down.aspx?url=http%3a%2f%2fwww.hantek.com%2fProduct%2fDSO4000C%2fDSO4000C_Manual.pdf. See pages 7, 37, 38. Also check out screenshots from my Acquisition menu, it has Eqi-time mode option, and it would be a bit strange if they've juct added that for no reason
Author: TMG Time: 2019-7-10 03:28
Hi Vitaly
It seems that our oscilloscopes are much more different than I thought. For my scope better fits user manual marked as DSO4000 B series however inside title is DSO4000BC series. Little strange naming convention.
Also SW version is missing on web page. You never know if newest is available. This should be improved.
I think is not added without reason but something went wrong and is bug in software. So it is not working as expected. I hope they fix it.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)
