Title: DSO4254C missing key reuse option [Print this page] Author: TMG Time: 2019-6-23 15:19 Title: DSO4254C missing key reuse option Edited by TMG at 2019-6-23 15:15
Hi
SW:1.1.2(190326.0)
HW:501.001.001.000.000.000.000.000
FPGA: a005
USB pendrive is connected and correctly detected.
In menu Display should be option Key Reuse (acc. to user manual) but in this SW this option is not available. Why?
Can I save picture using one button?
I know that is possible to use Save/Recal menu but then some information is overshadowed by menu.
Thanks for you answer.
Author: amy Time: 2019-6-26 09:05
You can try to long press Save/Recall rutton to save the screenshot. Author: TMG Time: 2019-6-28 05:00 Edited by TMG at 2019-6-28 05:03
Thanks for that hint. It's working.
However information about already saved picture is not correctly displayed.
Author: amy Time: 2019-6-28 13:23
Do you mean the question of the marker's location?
[attach]2975[/attach]
Did it appear on the screen after the picture was saved successfully?
Author: TMG Time: 2019-6-28 21:45
Yes, that is right. This is appear after saving file. Just after progress bar. This is information about file name but is not readable. Author: amy Time: 2019-7-1 14:48
I have feedback our engineer. Please wait for a while. Author: hoaoaihuong Time: 2019-7-1 15:01
In menu Display should be option Key Reuse (acc. to user manual) but in this SW this option is not available. Why?
Can I save picture using one button?
I know that is possible to use Save/Recal menu but then some information is overshadowed by menu.
Thanks for you answer.
Author: amy Time: 2019-7-9 15:20
Please download the firmware in this link to update.
