Title: USB driver for Win7 64 bit. IDSO1070a [Print this page] Author: Rileyph Time: 2019-6-6 20:23 Title: USB driver for Win7 64 bit. IDSO1070a Edited by Rileyph at 2019-6-6 20:22
Hi, I get this message when trying to load the USB driver for IDSO1070a.
please supply the 64 bit driver.
Regards
Paul
Author: amy Time: 2019-6-11 09:10
Please run this file.
[attach]2934[/attach]
If there are any questions, please upload the picture.
Author: Rileyph Time: 2019-6-14 21:29
Hiran the dpinst_amd64.exe driver. (my machine is Intel by the way).
It appeared to run correctly, but not in device manager. See attached.
Regards
Paul
Author: amy Time: 2019-6-15 15:55
Sir, please refer to the manual Chapter 1.2 to set the connection mode.
[attach]2950[/attach]
If the problem exists, please let me know.
Author: Rileyph Time: 2019-6-16 18:45
USB / wifi light on green constantly.
attached USB, was not recognised.
then software said no device loaded.
Paul
Author: Rileyph Time: 2019-6-16 19:17
Some more information.
I have tried the driver on a Win10 PC and it works.
I still have problems on my win7 PC, it will not recognise the USB driver.
An additional problem is that I cannot get into indirect WifI mode.
See attached image.
Author: Rileyph Time: 2019-7-2 20:55
This problem is now solved.
There is an error in one of the Win7 updates preventing the driver from working.
Thanks for your help Author: vernonls Time: 2019-8-3 06:54
The 64 bit drivers can be found here https://www.lectrosonics.com/Sup ... iver-installer.html
Download the aspen_drivers.zip file, scan to make sure it is not a virus, extract the files and run the dpinst_amd64.exe file to install the correct 64 bit drivers. I dunno why Hantek makes this so hard to find, but this solved my problem on windows 7 pro x64
vern
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)