Title: hantek 6074be [Print this page] Author: ecusdiaz Time: 2019-5-17 00:29 Title: hantek 6074be my hantek is recognized by pc, driver is installed properly but software doesnt open after double click nothing appears in display
but if i disconnect usb than the program open like everything was well but doesnt work.
this hantek was working with out problems i have this issue just a few days a go.
what can i do? Author: amy Time: 2019-5-18 13:25
Sir, please connect a 5V@2A adapter to the red connector of the USB cable.
Now check whether the oscilloscope works. Author: ecusdiaz Time: 2019-5-22 09:09
amy replied at 2019-5-18 13:25
Sir, please connect a 5V@2A adapter to the red connector of the USB cable.
Now check whether the osc ...
i did and is the same thing.
nothing happens until scope is disconected after disconnect software opens like everythings was working Author: Hantek_Zhang Time: 2019-6-11 10:37
Please try again on another computer. If it is still not possible, please let me know if this problem is the first time you use this machine, or after using it for a while.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)