electronic replied at 2019-4-4 19:07
https://drive.google.com/open?id=19082pXm_glyaalwkj4QtqMB5FkY5-k0E
electronic replied at 2019-4-5 15:53
Between pin 20 (VCC) and pin 21 (GND) of the CY7C68013-100AXC microprocessor is 3.3 V.
Between pi ...
electronic replied at 2019-4-23 16:24
I changed the CY7C68013A-100AXC chip and my oscilloscope started working. But while it is impossib ...
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/) | Powered by Discuz! X3.2 |